Jump to content

xyber

Members
 View Profile  See their activity

  • Content Count

    2,551

  • Joined

  • Last visited

 Content Type 

Everything posted by xyber

  1. xyber
    I'd keep a cat or sports cat, over a decat Even race cars have cats and a decat can lose you torque. It would give you higher top end and BHP, but how often do you use it. Torque in the right places is alot more fun
  2. xyber
    ditto, really good stuff never use anything silicone based, it makes things worse
  3. xyber
    If i was gonna get one I'd only go for dubpower, infinatly better quality and it has a flexi joint
  4. xyber
    TT shop sells them
  5. xyber
    Nice gimp mask haha. ;-p
  6. xyber
    More shine, less drag = more speed LOL
  7. xyber
    Gotta be done hasn't it, I hate swirls!!!
  8. xyber
    Do you 2BM wash Nat? Haha
  9. xyber
    If you have polished wheels, degreaser them really well with isopropyl alcohol and put on several layers of collinite 476s wax, it'd mega hardwaring and detergent proof, go it on my splits and they just wipe clean during the normal wash
  10. xyber
    Gloss black, banded steels! Just because it's winter is no excuse to run gash wheels peeps haha don't do what I did and run polished tt comps in winter, it nearly sent me over the edge
  11. xyber
    I wouldn't touch NOS unless the engine was built up to take it
  12. xyber
    No, just tight it up, if it keeps doing it a small doughty washer would cure it and keep it sealed
  13. xyber
    I put money on it when the fitted the new rear bearings they assembled them wrong and the grease seals got pushed out and the bearing overheated
  14. xyber
    Yeah they will go straight on with 205/40/17 tyres Not sure about them though on a mk3
  15. xyber
    Needs to be connected mate
  16. xyber
    Stat and fresh oil does wonders, at least 10 deg less I also use 50/50 mineral water and G12+ coolant which also works really well
  17. xyber
    milltek cat back
  18. xyber
    I normally check when cold, normally first thing in the morning, then all the oil has settled down in the sump over night
  19. xyber
    they just run underneath like if you have a schrick fitted, plenty of room, you could buy schimmel short, ht leads aswell if you fancy them
  20. xyber
    Don't get too excited, fire brigade may bill you for their efforts. Wounded!!!! Lucky escape though!
  21. xyber
    camcoat do ceramic work
  22. xyber

    oil coolers

    xyber replied to jims13's topic in Engine Tuning

    mounted mine on the underside of the passenger side chassis leg, made up a T shape out of ally angle, bolted on and gobbed on underseal just incase, then bolted the cooler to the underside of that T shape and it now sits right behind the bumper vent. As I have a 16 row I needed 90 deg bends coming off the bottom of the cooler to keep them up out the way, but if you have a 13 row that will be fine Works too well, Ive had to cover the front face of the cooler and leave the back to work as a heat sink and now its spot on
  23. xyber
    Custom one all the way
  24. xyber
    I know a few people that went and they all agreed it was toss and riddles with chavs Dubs at the beach is next month that a load of us from my local forum are going to if you fancy another show down ere in devonshire haha
  25. xyber
    Becks vier, guinness, broadoak moonshine cider
×
×
  • Create New...