Jump to content

Phat VR6

Members
 View Profile  See their activity

  • Content Count

    2,090

  • Joined

  • Last visited

 Content Type 

Everything posted by Phat VR6

  1. Phat VR6
    2 years no clames, 21 years old, 6 points, kwick fit, £1400. Exspencive but im happy with it due to my age
  2. Phat VR6
    borbets type As are very sexy lol, Ive got 17" 8" wide repila VW Santa Monica thingys, See left in little pic, There not my wheels of choice, I want some wide deep dish euro wheels yet £££££££ 16s or 17s on a mk3 imo, 18s are to big Mine where only £325 new without tyres and i think they look very good for the money!
  3. Phat VR6
    Ive had Toyo T1s and there very good but as said above don't last very long atall, Also had a set of Goodyear eagle F1s which are nearly as good and last alittle longer, I got my eagles off ebay for £60 a tyre brank new, Cheeper than my Toyos and got them fitted at my local trye shop
  4. Phat VR6
    I understand you removed your sunroof? Guessing it needs to be done for roll cage, Is this much of a job and whats required? I can weld, fabricate ect Cheers for the help Tom
  5. Phat VR6
    Top it up and see how it goes, keep your eye on the level and just dont let it over heat.
  6. Phat VR6
    Unlucky mate, I feel for you. LOL stop making it worse for him everyone
  7. Phat VR6
    Hello, VW charge £30 to put it on VAG.com But if you have a laptop you can buy it yourself for £4.99 http://cgi.ebay.co.uk/VW-Audi-seat-Car-Diagnostic-OBD-2-Code-Reader-Vag-com-U_W0QQitemZ220190021894QQihZ012QQcategoryZ30921QQssPageNameZWDVWQQrdZ1QQcmdZViewItem Ive just got it yet haven't used it yet so can't say what its like. Tom
  8. Phat VR6
    just 80 grit then? Thanks for the help
  9. Phat VR6
    Thats the one they sent me Kev :-( , They could have told me. Oh well! What you recon? Should I risk it or change to the gaskit to the one your using. Dont want to do the job agian and it isn't very good if they leak. I'll be getting the head skimed and sanding my block with 600grit. What you recon anyway, How much did yours cost, I donno how much i payed for this, did it with the card without asking lol cheers for the help Tom
  10. Phat VR6
    Hello, Its a high compression gasket not low compression, Im not fitting a spacer! Fitting this as you probaly know would not be good for a turbo ect, Im fitting this as my gasket is leaking coolant so needed changing anyway. I was under the impression that these gaskets are more reliable and a higher compression on a standard engine would be an improvment to throttle response and possibly a tad bhp but im not exspecting any, Higher compression also works better with NOS which im planning on doing to give me some cheep high bhp untill im older when Im going to turbo it! im guessing yo
  11. Phat VR6
    Looks good manzi, Didn't know that it was you with the fiber glass archs, Did the inner archs fit i sold you?
  12. Phat VR6
    Right yet another question from me lol My heart lies with a Turbo VR 4*4 drive convertion from 4motion in my Mk3 pushing big BHP, but due to my age (21) ive relised that altho I could aford to do it i should be saving for a house and insurance would be almost be imposible. So ive desided to get my car how i want it but leave the Turbo ect till im abit older, So ive desided to keep my engine prity much standard, Im doing a rebuild atm anyway Im changing the chains, Cams, Pistion rings, headbolts (standard not ARP and putting a HC 3 layer metal headgauskit in which is ment to work well with
  13. Phat VR6
    Keep german, Id have the A4 out of all of them, What kind of money you got to play with, Would they let you have the A4 RS V8 :-d Im guessing not
  14. Phat VR6
    Thats what I thought it could be but my VR hasn't got one, My 1.4 did and that ended up getting loose and flying out the back of my car lol
  15. Phat VR6
    Hi blondie, Nope no second car unfortunately. There isn't enuff room on the drive for one, I might still make it to the ring so I'll show my face then and meet everyone
  16. Phat VR6
    Hello, Your car looks realy good, When I first saw your rear lights standard I was shocked, Thought you where going to fit them like that but look wicked in red, Realy like them. I never have the patience to wash my car well, to be honist I donno how to, Tends to be a quick wash with a bucket and some car shampo or even worse a car wash lol bet you don't like the sound of that! I tend to treat mine abit ruff, drive it abit hard, gravel, mud pudles ect lol but after my respary this is going to change. Can I ask how much it costs to get a car detailed? When I start taking it to shows
  17. Phat VR6
    No good if it rains at the track then. Thats the kind of thing that would happen to me lol,
  18. Phat VR6
    Donno mate, There very cheep, but almost cheep enuff you gota try them, Good site for bits and bobs tho, exhaust flexy and clamps hoses ect, Can't think you could go wrong with the mainfolds? Id be intrested how long the turbos would last tho
  19. Phat VR6
    Hi, Im fitting a 3 layer high compression Metal head gasket , Should i use this stuff aswell or is it just for turbo charged motors, Mines standard? Surpose it can't do anythink wrong!
  20. Phat VR6
    Its anoying that VAG.com wont pick faults on the ecu its self isn't it. Oh well.
  21. Phat VR6
    http://cgi.ebay.co.uk/Mk3-golf-VR6-FK-tinted-fog-indicators_W0QQitemZ300187499311QQihZ020QQcategoryZ9889QQssPageNameZWDVWQQrdZ1QQcmdZViewItem these would look good on it :-d
  22. Phat VR6
    Hello and welcome, It looks good! Your going the right away about it, Its nice and low and I like the rear lights, Seems to be in mint condtion aswell
  23. Phat VR6
    Still a bargin for what you get in imo, Why don't get 9" rear with 3" lip? 8" front 2" lip, This is what id go for, 8" all round will still look wicked but think wider and deeper at the back looks better
  24. Phat VR6
    Its where your starter motor is fitted if we are on about the same hole
  25. Phat VR6
    Ebay. £15, Ive just brought it, donno if its the full software but ill let you know when i get it
×
×
  • Create New...