Jump to content

vr6turbo

Members
  • Content Count

    480
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by vr6turbo

  1. hi check your coolant temp sensor using vag com its what decides the fuelling until the lambda gets hot
  2. wanted mk3 golf roll cage for track use, bolt or weld in pm me if you have one please
  3. I was so close to buying your car it was on ebay about a year ago ( for the missus,honest) the only thing that put me off was the guy who was selling it would not put it through the mot. a special car good luck with the restoration
  4. are you using the vr6 throttle body
  5. can you pm me your address I will send them Monday
  6. no they are 2 parts sprocket and adaptor for the dizzy I have both parts if you want them
  7. I have one in my hand part number 021 109 475 is that what you need free if you pay the postage
  8. that's the one made sense when I fitted them
  9. Can you take a pic please I may be interested thank you
  10. I got a whole kit with a few of parts missing, I have been down the forced induction route before, and I have to inspect and repair everything, otherwise the weakest link will show. Been stripping the oil system at work cleaning the inline filter, and making some spacers up. The idler and supercharger pulleys are not aligned with the aux belt. and the ones someone had made that came with the kit are far from ideal. The injectors are all tested and cleaned, and within 2% of each other, very happy with them.
  11. The ball which stopped for a rest, is rolling again. My mate at work is going to mill out the manifold this week
  12. very good thread well done mate
  13. also I an having a having a hard time finding some software so an obd1 dizzy stage 2 chip is needed as well I have an VF engineering odb1 coilpack stage 2 chip I am willing to swop
  14. I wanted to fit the kit as vf engineering made it, its a shame they don't sell the parts anymore they are more interested in selling you a v3 charger I realise I will have to cobble together the intake and boost pipes and buy a check valve to stop boost pressure blowing the evap canister apart they did send a fitting guide which is good, if you want a copy I could send it to you.
  15. Hi just bought a v9 kit I have asked VF engineering in the USA they do not do spares for their kit, very frustrating I need the boost pipe as the one I got has been butchered and the intake pipe is missing so I have the money do you have the goods pm me please or where I can get them from why am I forever chasing obsolete stuff
  16. I agree its all about air flow and resonance the project has taken a bit of a back burner for now it will get finished after I fit my Vortech stage 2 into the track car I am building
  17. Just got mine they look ok can figure out what the fat hose with the small stub coming off it is for bleeding air maybe
  18. I think it was the throttle position sensor you can remove them and swop them over to check
  19. good call or some times the ignition barrel worn check you are getting 12v to the thin red wire on the starter when you turn the key to start
  20. have a look round the down pipe and manifolds to see if there is anything touching the exhaust sound like your coolant hose may be leaking onto the exhaust as well
  21. just need some samco stickers I have ordered a set they look 7.5 out of ten IMO
  22. still waiting for matey at work to get the milling done
  23. May be I fitted them incorrectly. But they caused my power steering pump to fail the top bearing can only rotate on one axis instead of 2 the strut has to be able to rotate and lean at the same time the rubber top mounts allow this movement I think they are very poor in design the top bearing should be like a rose joint and not like a wheel bearing. I am going to ask for my money back as they are rubbish
  24. Ok fellas I found them in another post German Ebay it is.
  25. Hi all mate of mine has been having a lot of hassle getting part numbers for his 4mo can anyone please help out with part numbers for the 2 pre cat lambda sensors its a 2000 plate 2.8 v6 4 motion local suppliers have said there are a lot of different ones available we are after bosch ones and maybe somewhere that does them for a reasonable price thanks
×
×
  • Create New...