Jump to content

Mk1dubzter

Members
 View Profile  See their activity

  • Content Count

    34

  • Joined

  • Last visited

 Content Type 

Everything posted by Mk1dubzter

  1. Mk1dubzter
    If you strip the car down yourself it will save a lot of expense.
  2. Mk1dubzter
    would have to agree on problem with the cat..
  3. Mk1dubzter
    You can run 9 on the front but as craggsy says ..use coilovers to reduce damper travel..
  4. Mk1dubzter
    most coilovers have a nut on the spring cap which your top bearing will rotate on..is there a nut fitted there ???
  5. Mk1dubzter
    Hi there I can help you with dishes but depending on which wheel they are you may no longer be able to get ally outers anymore unless they have some in that size ..if the radinox dish was an option that may be all that is now available... Hope that helps Vinesh
  6. Mk1dubzter
    I dont the stainless casing is that good quality.. they are a budget coilover set up
  7. Mk1dubzter
    The swerving under braking could well be a caliper sticking or binding. The squeaking could be the rear axle bushes rather than anything to do with the bearing . If you want to bring it down I will quite happily take a look at it for you..
  8. Mk1dubzter
    that is what you have to do now... tensioners only dealer items
  9. Mk1dubzter
    compression ratios seem fine as even across the cyls
  10. Mk1dubzter
    Kw or weitec are an excellent choice
  11. Mk1dubzter
    would suggest 40mm front and 35mm rear..
  12. Mk1dubzter
    ride on those is harsh....basically a budget coilover kit
  13. Mk1dubzter
    What about black diamond???
  14. Mk1dubzter
    Mine are less than that price dude ...
  15. Mk1dubzter
    the fan is supposed to run on until the temperature has dropped below the figure that the fan works from.
  16. Mk1dubzter
    never had a set break at all.
  17. Mk1dubzter
    Sounds as if handbrake mecahnism is seized..
  18. Mk1dubzter
    the image in the picture portays a stretch on a 7.5x15 wheel with a tyre that gave no problem going on and is used all round the vw scene... I have run those tyres on different 7.5 rims and they all look different. The problem that owen had on Edition38 was not checking his tyre pressure and letting it go down really low...thats why his tyre let go. Never had a problem with a tyre on a stretch coming off a rim .. to be honest most stretched tyres have to be fitted using a "cheetah" which blows out the sidewalls to the rim edge....allowing the tyre to seal.. Euro look is now commonplace in th
  19. Mk1dubzter
    Hi pete that adaptation is for later generation dubs..ie Mk4 golf Vr isnt done that way...
  20. Mk1dubzter
    If anyone wants one I have them....
  21. Mk1dubzter
    Hi dude the obd2 maf is available from VAG still ..exchange £75 plus vat
  22. Mk1dubzter
    Hi katie the codes need to be cleared first off... once this is done when problem occurs it will throw up crank sensor fault ..if crank sensor is faulty running lean could well be maf sensor ...
  23. Mk1dubzter
    the spal fans are very good value for money... Have used them plenty of times on jobs and work well ..
  24. Mk1dubzter
    You say you have new maf...is it fitted....??? Could be bad connection or supply to maf or possible lambda probe...
  25. Mk1dubzter
    Well in my Vr I use the Carbon cahrger system from Simota Racing which is patented by them...Its an absolutely awesome filter... increases in noise and power.....made from carbon and kevlar... I will post some pics up for you to see..
×
×
  • Create New...