Jump to content

Daverse

Members
 View Profile  See their activity

  • Content Count

    1,790

  • Joined

  • Last visited

  • Days Won

    18

 Content Type 

Everything posted by Daverse

  1. Daverse
    Mk2/3 syncro setup SOLD. Taking offers on 4motion drivetrain
  2. Daverse
    Might be leaking out of the heater matrix?
  3. Daverse
    Bump
  4. Daverse
    I believe so, you would also have to cut the spare wheel well out. I was going to fab these myself. Also if you are running turbo probably a bit out the bulk head too
  5. Daverse
    Hello, I am selling my setup to convert a mk3 platform to the 4motion drivetrain from a mk4. included is: 02M gearbox with shifter tower and transfer box 02M propshafts, these have been powdercoated gloss black and look lovely, however the painter has sprayed straight over the bolts and will just require cleaning out. Mk4 rear cradle Rear Haldex diff diff bracket that runs across the prop 4motion rear driveshafts Mk3 syncro rear axle rear wishbones, hubs and carrier mk3 axle plates Rear driveshafts to mix and ma
  6. Daverse
    Hi bud is this still for sale? im looking to buy soon when i sell my van
  7. Daverse

    Hi!

    Daverse replied to JustBaron's topic in Newbies Corner

    Welcome! Are you an owner or just looking?
  8. Daverse
    Good to hear you had patience! Just make sure you have no bolts left over and your laughing!
  9. Daverse
    Bump, open to offers
  10. Daverse
    It's expensive but it's about 3" thick full of torque settings and a useful throwing weapon. https://www.amazon.co.uk/gp/aw/d/083760365X/ref=mp_s_a_1_1?ie=UTF8&qid=1497288133&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=bentley+manual+golf+97&dpPl=1&dpID=51XCK0XNX9L&ref=plSrch
  11. Daverse
    the sound ?
  12. Daverse
    Hi mate sorry these sold a while ago
  13. Daverse
    Afternoon, got a few bits cleaned up but never fitted to the vehicle- all for OBD2. the pictures don't really do them justice, these things are IMMACULATE. Belt tensioner 021 145 299C - £45 Pulley alternator bracket 021280089A - £35 Power steering pump bracket 021145169D - £30 Cylinder head - originally done 135,000 .02 deck skim. Depending on what angle your valves are you may require getting new valve seats. £60 Collection from LN4 or postage at cost Picture
  14. Daverse
    Morning, OBD2 fuseboard and internal wiring loom (Cigarette lighter / radio / stalks) £35 Engine bay loom (firewall gromit, ecu connector and engine plug) £60 Fan controller relay - part number 3A0 919 506 B £25 Can post at cost, or pickup from LN10
  15. Daverse
    Morning, 7/10 condition, some flecks of either white paint or dirt (Pics shown) but cant really be noticed unless your up close. I would say it would come out with soft wet and dry paper. £35 posted
  16. Daverse
    Can't say Ive ever come face to face with a 3.6L, but if they are anything like the old 2.8s they should be separate, although yours is wired to the ecu.
  17. Daverse
    Depends how far you want to go! Couldn't hurt to look at the brakes too of course, there's a lot to be said for leave of mind? Look into cleaning out the rain gutters, they can clog up and you don't want it sitting around. Think there's a guide on here somewhere.
  18. Daverse
    I wasn't using a standard one mate, I was using an inline SX regulator I just had bolted to the manifold
  19. Daverse
    about 10 miles south east of Lincoln
  20. Daverse
    Yeah I think United Motorsport make them, or I'm not sure how hard it would be to make your own
  21. Daverse
    550 +15 shipping
  22. Daverse
    550 +15 shipping
  23. Daverse
    Chuffing hell, well stick up for as much as you can get then?
  24. Daverse
    Chuffing hell, well stick up for as much as you can get then?
  25. Daverse
    Got a w/gate, chargecooler, oil pressure sender, mad housing and a few other bits if your interested
×
×
  • Create New...