Jump to content

michael5556

Members
 View Profile  See their activity

  • Content Count

    1,983

  • Joined

  • Last visited

  • Days Won

    19

 Content Type 

Everything posted by michael5556

  1. michael5556
    I removed mine so you could probably purchase mine if your desperate. But I would recommend keeping it. It's just I am going for a shaved bay so removed it!
  2. michael5556
    Yeah could be the wter pump. It attaches to the brack that all your wiring goes through too.
  3. michael5556
    I know this probably doesn't have much point saying this now. I don't know Neal but I have bought something from him in the past and had no problem with it. Just saying that's all!
  4. michael5556
    I am currently making a mk2 vr6 with a smoothed and shaved bay. I have the coolant bottle in the boot along with battery and washer bottle. I have run pipes from the front to the boot but I am needing extra water pumps to help get the coolant to the front. My choices are: Fit electric water pumps and keep hoses to front. Buy a radiator from a fiat or Nissan with a fill up section on it and custom top rad hose. Keep mk3 Vr radiator and buy a filler neck and make custom top hose and fill up that way?
  5. michael5556
    Mine is just covered by a large waterproof sheet under a car port but as my paint is past screwed it will stay like that till the repaint.
  6. michael5556
    I was there two weeks ago! It's epic.
  7. michael5556
    Looking good!
  8. michael5556
    I just use a heavy duty G clamp
  9. michael5556
    Gt35 and 4wd in the mk2
  10. michael5556
    I removed the carbon canister and now it has nothing on the vacuum point. Any one got any suggestions?
  11. michael5556
    The wheel for the kinect is wireless. Sort of like a morio kart. Depends on how sensitive it is I suppose
  12. michael5556
    I Have pre ordered it looking forward too it! As I have kinect already. I am unsure wether to buy the wheel for it or not?
  13. michael5556
    Unclips. Use a flat ended screw driver. There are about 5 clips all the way along.
  14. michael5556
    Make sure you replace the o ring for it too as it will just leak otherwise.
  15. michael5556
    I have just done mine and can take a while depending on how much OCD you have! Lol
  16. michael5556
    Looking into buying a fault code reader bit most seem to be for obd2? Has anyone had any experience or recommendations? Thanks!
  17. michael5556
    Got it started but now it's just revving by it's self and pretty hard. Any ideas?
  18. michael5556
    Is that not 112 pcd though?
  19. michael5556
    Try putting the lock on. Then hold the handle open, then put it on the car and screw in. Should work then. Let me know if not!
  20. michael5556
    Going to have a go.
  21. michael5556
    The switches on my mk2 golf dash are rocker switches. I am fitting nitrous to the car and using a WOT switch. I am thinking about hooking the nitrous up to a spare fog light switch but just put nos over the light symbol? Am I correcting in thinking this would work and look very O.E.M? As I would need a power in. One to the relay and an earth?
  22. michael5556
    Lol!
  23. michael5556
    Ah ok! Thanks.
  24. michael5556
    Question about your exhaust? Are you not loosing a load of power due to no back pressure with just a pipe under the door? Or has it been mapped to solved this issue?
  25. michael5556
    Sounds like an imobilizer issue.
×
×
  • Create New...