Jump to content

Gazbarber1982

Members
 View Profile  See their activity

  • Content Count

    441

  • Joined

  • Last visited

 Content Type 

Everything posted by Gazbarber1982

  1. Gazbarber1982
    TPS
  2. Gazbarber1982
    Fuse 18
  3. Gazbarber1982
    School
  4. Gazbarber1982
    Been back in again this morning. They have stopped selling the 1 litre bottles of it which is a pain for a 5.5 litre oil change.
  5. Gazbarber1982
    Have they not scribed the sale date into the battery with a dremel or similar? A few places do it because people do lose receipts and it covers them too.
  6. Gazbarber1982
    Sentence
  7. Gazbarber1982
    TPS have stopped selling the above oil. Anybody know which oil replaces it as the guy from TPS had never heard of it! I was in a rush so didn't hang about to find a replacement.
  8. Gazbarber1982
    Depends which 16" wheels you got. I've got 16's and 312 brakes but I had to grind a bit off the top of the calliper to get them to fit in. Tight fit but they go on.
  9. Gazbarber1982
    Filler
  10. Gazbarber1982
    Bodyguard
  11. Gazbarber1982
    From what Vince told me, you may aswell replace your standard one with the same spec one because the map on your car is setup with that particular pressure. Your ecu would adjust the fuel trim to suit the map within specification or it could even throw up a DTC if it can't adjust the trim enough.
  12. Gazbarber1982
  13. Gazbarber1982
    I'll be there I think.
  14. Gazbarber1982
    yep
  15. Gazbarber1982
    Where abouts on the back of the fusebox is this culprit wire?? I'm getting a permanent short to ground on my brothers VR, without the maf being plugged in.
  16. Gazbarber1982
    There are 2 lambda's depending on obd1 or 2. The plug on obd1 is rectangular where as the obd2 plug is rounded at one end of it.
  17. Gazbarber1982
    Crank sensor possibly.
  18. Gazbarber1982
    Boring
  19. Gazbarber1982
    For the price of 6mm ally plate off ebay, I went with making a spacer about 90mm long x 12mm wide. Thats a guess at the measurements just so you know but thought it was a better idea than just washers.
  20. Gazbarber1982
    Wash
  21. Gazbarber1982
    I've just read the whole story, starts getting funny at around page 20 where the sun news paper gets involved, the police know nothing about it and people are phoning his works. If it's true, then I take my hat off to him!
  22. Gazbarber1982
    Just clips on and the end caps have a hex head screw in them
  23. Gazbarber1982
    I bought both the extra bits off eBay. 4 quid for bolts (you need high tensile bolts) and about 10 quid for 6mm ally plate to cut to shape. 120 is quite cheap really, I paid 150 but I then upgraded to ebc redstuff and ebc ultramax discs.
  24. Gazbarber1982
    They fit if you grind the top off the calliper slightly.
  25. Gazbarber1982
    If there's no gas or not enough pressure in the gas, it won't engage.
×
×
  • Create New...