Jump to content

rsweeney

Club Member
 View Profile  See their activity

  • Content Count

    776

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by rsweeney

  1. rsweeney
    how do i get the driveshaft boot all the way on im really stuck now cannot seem to get the damn thing on, it is so tight how do i get this on ?
  2. rsweeney
    yeah thats on im pretty sure will go and check
  3. rsweeney
    yeah seemed straight forward just need basic skills to do it and dont drop the sooldering iron but as i say mines on all the time !
  4. rsweeney
    just soldered one in seemed straight forward but now mines on all the time ?!
  5. rsweeney
    i just soldered another in but now have the problem that its on all the time ?
  6. rsweeney
    ok perfect will use the helicoil kit, it say that helicoil is ony 1.25 i depth though and the spark plugs 1.9 ?
  7. rsweeney
    hi guys nightmare whilst working on the renault 5 . one of the sparkplug threads is stripped what do i do ! feels like ive wrecked the car please help the sparkplugs that i put in are code A/W20EPR-U and 14mm thread and 1.9 reach according to this. http://www.globaldenso.com/en/products/aftermarket/plug/catalog/t-manual/pdf/P029.pdf what kit do i need ?? will this do http://cgi.ebay.co.uk/-14mm-SPARK-PLUG-Thread-Repair--M14x1.25-Solid-Insert_W0QQitemZ190260704291QQcmdZViewItem?rvr_id=220980689685&rvr_id=220980689685&cguid=f210ff011280a0e2042411d4fe9fa53e#vi-desc
  8. rsweeney
    thats really cheap , was it vr6 one ?
  9. rsweeney
    how much was the new header tank ?
  10. rsweeney
    how did you do this ? interested in this if you have a link to where to get the right bulbs
  11. rsweeney
    just had this on a daihatsu , turned out to be corroded / bad wire from door sensor. carefully pull the rubber of and remove the sensor and see whats going on
  12. rsweeney
    here it is
  13. rsweeney
    if you change it yourself aswell heres the guide or 01m http://faculty.ccp.edu/faculty/dreed/Campingart/jettatech/atf01m.htm as it says in this its part no G 052 162 A2 from VW
  14. rsweeney
    yeah thats what happened to mine the plastic had come loose , good that its sorted
  15. rsweeney
    if you could get get a pic up then i could be certain what it is . just press preview then where it says add file browse and pick your picture.
  16. rsweeney
    yeah just checking its only for a few seconds when you lock or open the car
  17. rsweeney
    how many jubille clips of each size do i need to do the whole engine on an auto vr6 ? going to be going and buying a whole new set if any one knows it would save me alot of hassle, thanks
  18. rsweeney
    Is the central locking ment to make a noise atall ? Mine has made a noise for as long as I can remember
  19. rsweeney
    defo sills , rust is a big killer if it starts also depending on if its auto check the gearbox works 100%
  20. rsweeney
    hi just wondered if this guide is any help to people with automatics http://www.deylan.co.uk/golf/096%20Fluid%20Change/index.htm
  21. rsweeney
    dexron 3 i think and fill it up from the dipstick hole ? if yours doesnt have the dipstick then im not sure but here is the guide i used, really detailed http://www.deylan.co.uk/golf/096%20Fluid%20Change/index.htm
  22. rsweeney

    seats

    rsweeney posted a topic in Interior

    hey , ive just replaced both seat guides on the drivers seat but the back is still moving about alot what can i do to fix the problem ?
  23. rsweeney
  24. rsweeney
    the tool if 4mm thick and can get other dimensions if you need
  25. rsweeney
    cheers so i have fitted it right just needs sliding on further? no metal ties needed
×
×
  • Create New...