DAZVR6 0 Posted April 9, 2008 Report Share Posted April 9, 2008 max cluch power 191.04max wheel power 173.04max torque 173.13Car was run as part of a rolling road day at Awesome gti.Mods-Powertec induction kit6-2-1 manifolddecatfull stainless exhaust. Link to post Share on other sites
FishWick 21 Posted July 17, 2008 Report Share Posted July 17, 2008 Finally sorted some image hosting out, so here's mine. Done on stealth's dyno last year. 2 runs overlaid. Engine spec in my signature.They're not perfect by any means, but I am quite proud of them because it's a map I did myself on the road.Both power and torque holding well in the higher rpms. Not bad for a two box 2.5" exhaust and 11psi ;-) Power -Torque - Link to post Share on other sites
xyber 1 Posted July 19, 2008 Report Share Posted July 19, 2008 Fresh back from stealth with some upgradesCar:Golf mk3 2.8 12v VR6 engine (OBD2), approx 55,000 miles.Mods:Vf/V9 charger @ 8psiRed topsSchimmel leadsSchrick VGI2.25 custom exhaust from standard cat back (wish i had a 2.5 and sports cat !!!)Custom remap at Stealth Racing295.0bhp @ 6674rpm 240.3ftlb @ 5697rpm Tried scanning them for comparisons between stages but my scanner died so only got the torque graphs, Schrick makes hell of a difference low down, I just need to move the switching point back 100rpm now to smooth out the bump abit Link to post Share on other sites
Radostormvr6 2 Posted September 12, 2008 Report Share Posted September 12, 2008 Heres my results now im Turbo, this was at JKM in portsmouth. Its a GT3076 TURBO running @ 1 bar401bhp & 380lbft torque Link to post Share on other sites
mike 6 Posted September 12, 2008 Report Share Posted September 12, 2008 173 bhp knackered coil pack, and some sort of fueling issue i stil ahvent sorted.... Link to post Share on other sites
cabrioman 6 Posted September 12, 2008 Report Share Posted September 12, 2008 282 bhp and 241 lbft not to sad Link to post Share on other sites
Eat this 2 Posted September 12, 2008 Report Share Posted September 12, 2008 you mean 282 hp fella?mines 320 ho and 275 lb ft Link to post Share on other sites
cabrioman 6 Posted September 12, 2008 Report Share Posted September 12, 2008 and u are the winner of the double twix bar lol ... bugger my bad lol Link to post Share on other sites
pops 1 Posted September 18, 2008 Report Share Posted September 18, 2008 Link to post Share on other sites
pops 1 Posted September 18, 2008 Report Share Posted September 18, 2008 as you see a little hiccup just above 400bhp it dips slightly, from here on up it wheel span on the dyno. couldn`t keep traction on the rollers, even with 2 blokes sitting on the bonnet Link to post Share on other sites
H13VYY 0 Posted September 19, 2008 Report Share Posted September 19, 2008 woah! pops whats the spec on yours? Link to post Share on other sites
Radostormvr6 2 Posted September 19, 2008 Report Share Posted September 19, 2008 Pops you running a GT35 or bigger ,looks like a bit of lag there Link to post Share on other sites
pops 1 Posted September 19, 2008 Report Share Posted September 19, 2008 well that run was 1.2bar in 4wd, kept wheel spinning from 4k seriously the lag doesn`t notice while driving , plus still got plently of torque at 5k rpm Link to post Share on other sites
FishWick 21 Posted September 26, 2008 Report Share Posted September 26, 2008 Pops you running a GT35 or bigger ' date='looks like a bit of lag there[/quote']T70 I'll bet.....I'd rather have less boost and restacked gearing. It's faster than wheel spinning Link to post Share on other sites
pops 1 Posted September 26, 2008 Report Share Posted September 26, 2008 radostorm is right , got a t70 on the other car , gt35 with the right tuning is gonna spin the wheels anyway, just to add its got a 6spd quaife with 3.1 final drive, 1.2 bar was its limit as it spun in every gear including 6th Link to post Share on other sites
jims13 6 Posted October 6, 2008 Report Share Posted October 6, 2008 well i got ..327 bhp at 12psi..schimmel 263 cams, arp head bolts, spaer plate , exhaust and begi fmu.. Link to post Share on other sites
kcw 1 Posted October 6, 2008 Report Share Posted October 6, 2008 Just had mine RR'd on Saturday, car has a Milltek system and old ramair filterMake 189.5bhp and 177lbs/ft, pretty pleased with that. Link to post Share on other sites
veedub69 0 Posted November 29, 2008 Report Share Posted November 29, 2008 Just bin rollin roaded at Mikeanics, Staffordshire.Peak power 179.2 Bhp @ 6242 Rpm,Peak torque 158.7 Lb/ft @ 5253 Rpm,2.8 Golf mk3 Odb1 with 100k miles,Powerflow cat back exhaust andPipercross filter for that addictive roar!!Pretty suprised at the figure's, thought it would have lost a few hoarse's. Don't know where the 15 or so torque's have gone. Probably fell off the car. Link to post Share on other sites
GVK 1 Posted November 29, 2008 Report Share Posted November 29, 2008 This is Pops on the left. Link to post Share on other sites
GVK 1 Posted November 29, 2008 Report Share Posted November 29, 2008 0BD II 2.8DRC 268sCarbonio CAIeBay 6 branchmk4 HGUnorthodox racing alloy flywheelC2 UK NA software216.9bhp @ 6189rpm (118mph in 4th gear)192.2 lb/ft @ 5297rpmBig thanks to C2 motorsports UK for writing some cracking software for the VR6.You tube vid of power run - http://i74.photobucket.com/albums/i270/GVK34/Rubbadubz%20Stealth%20rolling%20road%20day%20June%2029th%202008/gvkpowergraph001.jpgPowerhttp://i74.photobucket.com/albums/i270/GVK34/Rubbadubz%20Stealth%20rolling%20road%20day%20June%2029th%202008/gvktorque.jpgTorquehttp://i74.photobucket.com/albums/i270/GVK34/Rubbadubz%20Stealth%20rolling%20road%20day%20June%2029th%202008/gvksummary.jpgSummary Link to post Share on other sites
jonny_gti 0 Posted December 6, 2008 Report Share Posted December 6, 2008 OBD2 2.8 golf2.5" custom exhaustde-catbmc cda192.3 Bhp @ 5149rpm192.5 lb/ft @ 3995rpm Link to post Share on other sites
GVK 1 Posted December 8, 2008 Report Share Posted December 8, 2008 well that run was 1.2bar in 4wd' date=' kept wheel spinning from 4k seriously the lag doesn`t notice while driving [/quote']Not exactly much to pull around in that car is there... Link to post Share on other sites
pops 1 Posted December 24, 2008 Report Share Posted December 24, 2008 yeh there is specailly when i`m in it Link to post Share on other sites
GVK 1 Posted January 19, 2009 Report Share Posted January 19, 2009 Is it going to be out and about this year or are you still breaking stuff? Link to post Share on other sites
pops 1 Posted January 19, 2009 Report Share Posted January 19, 2009 it certainly is mate out about in it today , Link to post Share on other sites
Recommended Posts