Jump to content

Justicevr6

Members
 View Profile  See their activity

  • Content Count

    236

  • Joined

  • Last visited

 Content Type 

Everything posted by Justicevr6

  1. Justicevr6
    Ah but you have a early VR6 pre 95 I just looked on the site and for the VR6 post 95 they were
  2. Justicevr6
    Look at that 2 in a row play keyboards and sing hence the Sharan, me and the wife have been doing it for 10yrs , good way to earn a living.
  3. Justicevr6
    Fits and farts,and I've only had mine a couple of months I have been doing a lot of work replacing joints bearings etc enjoying myself, find a blow on the exhust damage an abs sensor badly scuff one of me new wheels, spring a water leak and hate the bloody thing &| .
  4. Justicevr6
    Plug size is 10mm socket 16mm, I would have thought you are better off going to a shop and just buying the socket (about a fiver)as most people have a ratchet and bar.
  5. Justicevr6
    I notice that you had a rear wheel bearing done on the 8/7/04 and again on the 10/9/04 2 months for a wheel bearing was it made of plastic.
  6. Justicevr6
    Can you discribe where the hole is, click the link for picture in For sale section http://www.vr6oc.com/e107_plugins/forum/forum_viewtopic.php?77729 you don't want to replace if you don't have to.
  7. Justicevr6
    Best way is put out your fag if you are smoking %-6 Yes fuel will leak from the filter if you have an old washing up bowl then put this underneath whilst changing it,when restarting the car it may die out until the filter fill back up with fuel,it's a simple job to do. Sorry forgot to say, no the fuel in the tank will not empty as soon as you take the pipe off the filter as long as you are not putting the new one on till tomorow.
  8. Justicevr6
    I have posted this question on another forum before thinking that a lot of you will have or had a VR6 auto. My question is Just wondering if it is posible to alter the gear change in relation to the speed I am doing. If I drive normal the box is smooth and quiet If I floor it it red lines in each gear going into top at just over the ton What I would like is to floor the throttle but have the gearbox change at 5500rpm instead of red lining as I do not feel this is good for the engine. Is it possible ?!
  9. Justicevr6
    I like the first link !amazed Nice car
  10. Justicevr6
    No problem Pete Any particular ones or just ones showing all aspecs of the engine bay,do you want close ups of different things. I am doing the CV's, bearings disc's and pads tomorow so will take a load of pictures as I won't be going anywhere lol!.
  11. Justicevr6
    Who me or Neirh ?!
  12. Justicevr6
    Thanx .
  13. Justicevr6
    This bit .
  14. Justicevr6
    Took all the covers off to get a better view of a weeping hose and saw this, I'm not sure if there should be another bit or is this what it should look like. :| .
  15. Justicevr6
    I just want to make sure everything is working as it should,as most know I have been going through the car full service ETC and when I boot it it soulds as if it is sucking too much air I also feel slight vibration through the gas peddle when booting it,It may just be me worrying to much but I want to get all I can out of the engine. http://en.openobd.org/locations.htm#vw_sharan_7m
  16. Justicevr6
    Is it worth buying the harware for Vag Com, will it tell me things I would'nt be able to find out unless I had it and can I do things that I would not be able to do without it. Cheers Ian
  17. Justicevr6
    I have just spoken to DL and there is no extra to pay for having my windows tinted !lol
  18. Justicevr6
    After reading threads on insurance I rang my insurance company up and told them I have just fitted 17" alloys, for that plesure it now going to cost me an extra
  19. Justicevr6
    Cheers Chaps Went out and tried it and you are 100% correct thats a load off my mind,it just seems the more I do the more I find wrong,changed the coolant found a leak in a pipe behind the engine
  20. Justicevr6
    I am sure this is not normal but when I put the fan on in the car the radiator fans kick in even if the engine is cold, it dos'nt mater if the fan is set to hot or cold,if I turn the fan on with the ingnition on but not running the rad fans will not start but as soon as the engine starts the fans start as well. Any idea's. &|
  21. Justicevr6
    I have been looking through the Haynes book on the Galaxy (even though I have a VR6 Sharan) and thought I would check how to top up my auto transmision fluid,the book says it is best to take it to a dealer as they will plug in the diagnostic to make sure it is at the right temp for checking so for me to do this would be hit or miss as to weather I got it right , then on the very next page it says about topping up the final drive level which is a different fluid but still for an auto box. I am not stupid but could someone explain what and why there are to different oils in the auto box,becouse
  22. Justicevr6
    After thinking I had sorted out my water problem on my Sharan I noticed today that the temp was getting a bit hot so when I got home lifted the bonnet I could hear a faint hissing from the rear of the engine bay and a hose that comes from the back of the engine has a sensor plug on it and just below the sensor there was a lot of grud and I could see water trickling out, What I need to know is, is there a quick temp cure to stop it leaking until I can get a new one on Monday.
  23. Justicevr6
    What so that will tell him what other forum members use on their cars
  24. Justicevr6
    225/45/17 Kumho on mine
  25. Justicevr6
    The rear is now done ,quite straight foward other than nackering a sensor on one of the rear wheels,(need to buy a new one) gonna start on the front tomorow, bearings disc's and pads and CV joints (big thankyou to Claire and her partner who has the same name as me Ian Williams 2 brand new CV joints for
×
×
  • Create New...