Jump to content

VR6Rob

Members
 View Profile  See their activity

  • Content Count

    173

  • Joined

  • Last visited

 Content Type 

Everything posted by VR6Rob

  1. VR6Rob
    You will need the Cruise Control ecu and some vacuum bits, looking in the bentley manual.
  2. VR6Rob
    you can get them from gsf for £135 They had them in stock when i needed one a bit back. Made by BURE same as OEM
  3. VR6Rob
    It comes with a filter http://carboniointakes.com/vw/vr6.php Awesome GTI have them listed for the MK4 18T, MK4 1.9TDI, Mk4 V6/R32 for £165
  4. VR6Rob
    Obd2 I was hoping for a bit more as some have got more with just the manifold. but loving the pull from 3000rpm.
  5. VR6Rob
    I got my 260/264 cams, schrick manifold, chip and RR done at stealth and got 203Bhp 202lbft up from 191Bhp 185lbft http://img78.photobucket.com/albums/v321/VR6rob/ As every body says it has completely transformed the way the engine pulls.
  6. VR6Rob
    There tomorrow getting my Shrick manifold + cams fitted.
  7. VR6Rob
    Main stealer only had to wait 2 weeks to get one last month
  8. VR6Rob
    Could be the switch not latching?
  9. VR6Rob
    theres a chart in the instructions telling how to set the switch positions inside the electronic control box 3,500 is 1= on 2 = on 3 = off 4 = off 5 = off 6 = on
  10. VR6Rob
    the second fan is driven by a belt from the other fan so they both should go round togeter. Over heating problems on the VR are normaly a stuck thermostat or electric water pump failing
  11. VR6Rob
    you need to check that your battery is holding its charge. charge the battery ond check the voltage it should be about 12V test it again after a hour if it has droped below 10-11V you need a new battery you can also check that its charging on the car with the car running you should be getting about 14V at the battery.
  12. VR6Rob
    I got some black beru from GFS for £45 ring and check what they have in stock.
  13. VR6Rob
    312mm
  14. VR6Rob
    if the cam is moving its full travell its ok The butterfly moves with the cam so yours sounds ok
  15. VR6Rob
    I can also confirm i have this problem aswell just tried to fit it and once the bolts were tightend the butterfly would not move at all.
  16. VR6Rob
    if they are the same as audi TT 312mm brakes you can use the discs and calliper carriers with your callipers and a 5mm spacer.
  17. VR6Rob
    Mine sits on 90 all the time it used to go up/down abit untill the electric pump packed up. replaced that and the termostate.
  18. VR6Rob
    you use the standard links you can replace the bushes with poly ones
  19. VR6Rob
    VW?
  20. VR6Rob
    Bure still make leads for the vr6 got some 2 weeks ago from german swedish & french for £40
×
×
  • Create New...