Jump to content

matty.vrt

Members
 View Profile  See their activity

  • Content Count

    929

  • Joined

  • Last visited

  • Days Won

    15

 Content Type 

Everything posted by matty.vrt

  1. matty.vrt
    Fancy selling the r32 servo im after one.
  2. matty.vrt
    what gearbox is the 02q out of
  3. matty.vrt
    mine goes to 7500 no problem
  4. matty.vrt
    if you go on wheel whores they have a pretty cool calculator personaly ide aim for 15mm on the front and 20mm on the rear
  5. matty.vrt
    spacer gasket will get you on your way save the pistons for later if you dont want a massive build cost.
  6. matty.vrt
    big is better the vr6 block is massively strong
  7. matty.vrt
    madigras motor-sports keep helix in stock
  8. matty.vrt
    I had a vortech v9 on my old vr6 and it felt like it was still n/a as far as power delivery was concerned not my cup of tea mid range torque is where its at.
  9. matty.vrt
    i used a roatry bur
  10. matty.vrt
    Would love to try one but i had to bore the hole on my turbo manifold out to 38mm never mind trying to get 44mm i need to buy the real ATP one but as it works fine its hard to justify.
  11. matty.vrt
    gearbox has gone swaping it at the weekend
  12. matty.vrt
    kev mite the slight spike have anything to do with the springs cracking pressure been slightly higher than the operating pressure.
  13. matty.vrt
    i bought my car and turbo'd it myself for 3 grand do allot of research into what works best and read kevhaywires diy turbo guide theres allot of usefull info in there. And as for paying some one to do it its your choice i wouldent trust someone else to change my oil never mind turbo my car your labour is the cheapest and you know its been done right.
  14. matty.vrt
    not surprised omegas weigh more than most tanks.
  15. matty.vrt
    no spikes here either thanks for the info maiden
  16. matty.vrt
    hoping my car will be back on the road for this. fingers crossed.
  17. matty.vrt
    Im talking no turbo when i meantion those figures garry. and oliver6 you realy need a set of 4 tyres to realy judge how good a tyre is.
  18. matty.vrt
    do you hafto have a pro maf to run 30 psi maiden or can you run that on the stock 630# file
  19. matty.vrt
    i use a tial 38mm valve works a treat from 7 psi - 26 psi
  20. matty.vrt
    Im so jelouse for the car and the fact that you can run at inters.
  21. matty.vrt
    toyo's dont last as long but are far better in the wet then again its summer now and paradas are awesome in the dry expect 7000 frrom toyo and 10000 from yoko
  22. matty.vrt
    yes, to take the peddle off and back on there is a simple clip on the left hand side. just wedge a screwdriver in the clip and it should pop off when your done it just slides back on.
  23. matty.vrt
    order Rod clip Peddle where the clip fits into the peddle there is a black bit of metal that is tack welded on to the peddle that often fails if this has happed on your car you hafto get it welded up or buy a whole new peddle.
  24. matty.vrt
    gt4088 = WIN
  25. matty.vrt
    as garry said c2 motorsports is the quickest and easyest way of getting your vrt up and running. its also the cheapest and drivability is like stock till the turbo kicks in.
×
×
  • Create New...