Jump to content

Rikki

Members
  • Content Count

    971
  • Joined

  • Last visited

Everything posted by Rikki

  1. Rear light seal on a golf. Never heard of leaking through the spoilers???
  2. Obd2 doesnt have a bleed nipple. Its done with vagcom. Just change the sensor for th3 25 that it costs. All mk3 ones are the same just round or square plug!
  3. Obd1 its better on a Z to have before the charger as long as its mapped that way. Obd 2 's are ok to have them after...mines been that way for 3 years+. That link is for a different charger mate.
  4. If your obd2 (95/96 on) under your rear seats is where the abs sensors plug into the loom. Swap them from left to right (small square 2 pin plugs) then check vagcom again....if the fault still says left your ecu under the abs pump needs probably needs replacing ! If it switches to the right its just the sensor usually!
  5. Yea 6e if you na turbo or charged go for bkr7e's
  6. Not without modifying....front seats are easy plenty of diy's on the net for front and rear
  7. Thanks for the comments people. Heres a few more fairly recent ones of mine ! Really really need to get some pics done with a proper camera!!!!
  8. True....not awake this evening haha
  9. Not really an easy change imo. Shouldnt hurt to run with the stat open....just wont get too hot in the winter?
  10. Rikki

    gearbox oil

    You sure they are the same...iirc the starter bolts up differently. Vr6 boxes are easier to find too???
  11. Get the standard ds lite....then buy an r4 chip.....free games!!!!
  12. But they are interchangable disc and caliper wise...hubs are the same. Sorry wasnt havin a pop at you just people talk about obd1 and 2 and make it all sound so difficult. Someone with etka cross reference the part numbers please!
  13. All 'Rados are obd1.....and OBD stands for On Board Diagnostics so its just to do with the controls of the engine! Ask at VW to cross reference the part numbers!
  14. Obd2 ecu is under the pump in the engine bay. Make sure you get an identical part number and you may need vagcom to code it as....you need to get a key using vagcom before you remove the ecu and code the new one if its different!
  15. Known as the gearbox mount....passenger side rear. You can use a diesel one as they are rubber not hydraulic!
  16. All a4's are 5x112. Pic of the wheels would help
  17. What about window roll up....more wires or part of the cl?
  18. Was it easy to wire up....they do a kit with a mk3 plug n play loom. Here you go http://www.rclick.co.uk/product_info.php?cPath=50&products_id=480
  19. Yup i have a 2.9 in my obd2....as Goth said just keep your obd2 inlet tb etc.!
×
×
  • Create New...