six appeal

Yeh currently has an OBD1 throttle body plate on it, but OBD2 plates are readily available
Simon.

I have one on its way now but cheers Simon 😊
Sent from my SM-G920F using Tapatalk

Hi guys,
Here are some photos of Leo and his slow progress since coming off the road in September 2014!
I hope you like!! Please see my instagram for more photos @emmacorradovr6 
Here is Leo when I first brought him!
One of the first things I did was completely strip and clean his interior.
I then stripped his wheels to brighten him up abit!
Then came Air I brought my air suspension from my friend off of his Corrado
Then Leo was off the road
His engine was then removed
and then we found the gearbox problem! Very broken 3rd gear!!
this is thr engine before painting
here is the painted engine and new painted gearbox
the engine is back in now but nowhere near road ready! So the engine is coming out again and we will get the body ready for a re spray, build a rollcage and shave the engine bay! If you have any images or advise for me when shaving your vr6 bay please contact me!!
Sent from my SM-G920F using Tapatalk

Pretty sure I have a spare or two around. PM me if still needed.
Simon.

Went out for a nice drive in the black VR, now that I've finished all the new water system, and oil cooler set up, and run much cooler, I may swap back to the original fan switch, instead of the low temp switch. As the fans are almost constantly on, and they don't need to be, now I have the bigger rad and external oil cooler. 
 
Temporarily using a spare de-badged grill I had, while I re-paint my original grill. 

Did you say Obd1 ??? 

I do have a TB adaptor but it's for OBD1 but thanks for the plug

Been realy busy just had a quick dig through my phone for a few pics . 
 

these brakes are for in the for sale section as looking at tarox 8 pots . There's a pic from Westside 2015
mine with sixappeal 
Dsr perfection polishing the bonnet. 
Dying to to get the 3.0 low comp lump in but been flat out at work just not had the time 

We WANT more pics!!!!!!
Simon.

We WANT more pics!!!!!!
Simon.

We WANT more pics!!!!!!
Simon.

We WANT more pics!!!!!!
Simon.

A friend of mine runs a Air company called Everything Air . His websites under construction he's prices are very reasonable . Info@everythingair.co.uk for all your needs

Running a rotrex charger . Currently got a 3ltr low comp bottom end being built wossener pistons , pec rods and arp hardware in engineering shop .
Wheels are Compomotive Th2's
Since this pic she's been back into Paynes to have arches rolled and sits a bit lower
Pics to follow

Love them rims!!

Here is my supercharged vr6

What price are you looking for mate?? Will the caliper's need a refurb?? 
 
Cheers

Calipers are used . They work but to be mint would require paint . I run them without the refurb as through my wheels you can't see the back part that needs painting they owe me £750 make me an offer ? 

I have a 323 mm porsche set up for sale . Everything you need to bolt on mk3 vr . Disc and pads only done 900 miles

Thanks for all the advice mate really appreciate it , was worrying about finding anywhere to get the block done lol so it's helped me quite a bit cheers

VRTonline.co.uk
They are in Slough, so not too far from you. Ex VW Master Techs who do anything from MOT/Servicing to full on Mapping/charging of R8's! Both the owners Ryan & John run modded VR's as dailys too
Simon.

I'm sure that @hvr6 had an adaptor plate for a schrick. 
 
Maybe if Helen still has it might be useful for any potential buyer.

It's actually in better condition than the one on my Mk3 Pete, literally as new after the aqua blasting and new bolts etc. 
Sure i could sort you some sort of deal out if you really want it...............
Simon.

Would love another schrick on my VR6 and wish I had that type of money!
looks like new!
theyve held their value very well over the years! Good luck with the sale mate.