Jump to content

vr6stormt

Members
 View Profile  See their activity

  • Content Count

    796

  • Joined

  • Last visited

 Content Type 

Everything posted by vr6stormt

  1. vr6stormt
    ive just taken my clear set off if you want them for cheap the fogs dont have backs thou ?
  2. vr6stormt
    you have been busy...
  3. vr6stormt
    what has this all happened since that noise at the pod?
  4. vr6stormt
    wicked pics mate but you could of left mine out with that scab hanging off the front lol
  5. vr6stormt
    cant wait to see this one gooooo... love the fabrication paul looks wicked..
  6. vr6stormt
    good laugh looking forward to the next one with better weather lol....
  7. vr6stormt
    i took mine off the other day to replace the heater matrix if you just want the dash out its a row of 8 mm bolts all along the bottom edge off dash and screws behind all the bits of pop off dash blanking bits and under the scuttle panel you take off the wiper motor to get to one 10mm bolt and next to the cabin filter another one if you need to take out the frame behind the dash ie: for h/matrix its the two star bolts either side in door shuts ther are bolts behind the heat sheild on the bulk head by the down pipe if you want to talk to me about it you can call me on 02380320080
  8. vr6stormt
    you need to take the wipers off there under there 10 mm x 2
  9. vr6stormt
  10. vr6stormt
    were have you taken screws from so far
  11. vr6stormt
    I know get me! Bit pointless really' date=' ive only ever used it once :^) visibly saw the fuel needle dropping so turned it off rather sharpish lol [/quote'] you know it, i took mine out once i saw how much juice it used i dont mind the sunny open and the windows down in the summer
  12. vr6stormt
    bungy who`s berry? made me lol that one
  13. vr6stormt
    have you checked the bulbs in top of the clocks?
  14. vr6stormt
    flo-flex ltd make them for £25 in bright orange...
  15. vr6stormt
    yep just pop the blanking plate out in between the ind & fog
  16. vr6stormt
    you can use one of your wheel nuts with a ring spanner
  17. vr6stormt
    mechanic as well but working for myself at the mo...
  18. vr6stormt
    after you fitted matrix did you use original hose clamps (vw) or jubilee ? sorry the reason i asked i over tightened the jube clips it deforms the plastic pipes which was loosing about a litre a weekand couldn`t see where it was going..
  19. vr6stormt
    i dont know of any reason why the pads would overlap maybe get some more pads and see if its still like it if it is then check out the disks are the right ones? because the pads are overlapping the disks they are not going to give even pressure on the disc face and you will end up with uneven wear on pads and discs...
  20. vr6stormt
    i agree what else are you getting for that money?
  21. vr6stormt
    cheapest is on ebay £20 or gsf £40
  22. vr6stormt
    the pads should be nearly flush to both inside & outside edges not overlapping ?
  23. vr6stormt
    ok then, i just thought when i looked at bungys map it went quite far up the M3 must ov been half asleep lol
  24. vr6stormt
    is anyone meeting at winchester services?
  25. vr6stormt
×
×
  • Create New...