-
Content Count
175 -
Joined
-
Last visited
Content Type
VR6OC News
Website Content
Profiles
Forums
Calendar
Gallery
Store
Collections
Community Map
Posts posted by Russvrt
-
-
I've tried three of them. Run out of ideas.
-
Ok I'm changing my obd1 turbo set up to obd2 ,everything is back in and plugged in but when I go to start the car it just turns over..
I have power to the throttle body as that adjusts itself when the ignition is turned on,,I have spark but the fuel pump doesn't prime, and the red/ yellow injector wire has no power to it..
If I jump the two large terminals in poss 12 fuel pump relay ,the pump runs,,
I have the jumper wire in 30/30b,,,ecu pin 54 is live so what could be the problem ..?
Please help!
-
Sounds sooo good!
-
-
Heres some pics for you of where im at ,,
boost pipes all tig welded thanks to my mate fitz,,
filled it with coolant tonight so could get it up to temp and it runs so much better warm ,,
Having a few starting problems where it takes ages to fire up from cold then wont idle till its warmed up abit..
pics
]
]
]
just need to bleed the brakes and finnish the exhaust now so it can be tested ,,
will be at Fitted UK on 20th july at weatherby race course ..
-
Just spent the day making my exhaust ,what a pain in the backside that was and still need to do a bit more to get the back box sitting right but it's almost there ,
-
Oh and changed my profile name from 20vtvw ..
-
-
Once I've paid my fee and actually join the club I'd love to have my corrado on the stand if possible?
-
Well been on with this as much as possible this week and got loads done but doesn't really look any different !
Coolant pipes all fitted ,boost pipes all in and clamped,I've welded the down pipe and fitted two lambda bosses,made up exhaust from down pipe to rear axle(still need a few parts to Finnish the exhaust as it's too loud with just one silencer)
Just waiting for my mate to Finnish tig welding the 4"intake fill with coolant and test drive!!!!
Will get some pics up when it looks like I've done something..
-
bit of an update for you guys,,
ive been busy today sorting a few bits,
first of all got new tyres fitted to the zw1s so fitted those along with some 312mm brakes,
I think they fill the wheel nicely.
and ive tacked my boost pipes together in place ,just waiting for my mate to tig weld them up for me next week..
and refurbed the front panel with welded in boost pipe to shorten the length as much as possible.
and did the same with the intake including maf.
nearly done ,what do you think?
-
-
3 piece OZ Vegas ,8 and 9 x16s with 195 40s front et 20 and 195 45s rear et4
Miss these wheels but no room for brakes.
-
-
Well stil plodding on with this ,did a little bit this weekend and after finding a great build on vortex I have changed how I'm routing the boost pipes to give the bay as smooth and clean look as I possibly can ,not easy with a vrt in the very tight rado bay.
All parts are here now just need time to fabricate and get it all fitted..
Pics
Intake and rocker will be colour coded too so should look neat and tidy,,
-
Trim looks good ,when will it be done so we can see it in colour ?
-
Il be sending my intank unit to stealth where they can modify it and fit the walbro pump inside,plug and play and capable of good power.
-
I have a head you can have going spare if you can't get yours sorted easily,,would have to be collected from Harrogate tho,,
-
Bay looks great! Are you not running a brake servo? Or are the holes just taped up?
Hope to see this sometime this year,,
-
Will do ,gone 3" as it apparently opens up the top end?
Would love some 6 pots but can't afford everything at once ,,
First main outing should be the corrado club national day at bruntingthorpe on 24th,25th May ,will you be there?
-
Should be around 400 hp ,a LSD is on the shopping list for next year and it won't be paying out at this time of year ,dry days only for traction I think,,
Also just got myself some 312 mm brakes so that should help slow it down a bit,,
-
Thanks for the comments,, will take you for a spin when it's done Luke ,,,
I built my down pipe at the weekend just need to make the rest of the exhaust now ,going for 3" 200 cell cat then 3" straight through pipe to back box will be pretty loud I think but don't want to choke the turbo,,
My intercooler has arrived it has 3" inlet and outlets so can run 3" to throttle body but will drop to 2.5" from turbo just need time to fit it,,
The rest of the parts I need will be ordered in a couple of weeks and hope to get it all fitted when I take a week off work in March
Hope it goes to plan!,,
-
Il have one if he sorts the tail pipe ,has to be easier than making my own and there a good price too,,
-
Great news! Can't wait to see the vid,,will have mine done I a couple of months ..
Obd2 vr ,no fuel pump or injectors power
in Engine Maintenance and Problems
Posted
Also think I have a bigger problem ,the throttle body clicks along with what sounds like cam sensor and battery light flickers ..
This loom has been hacked at by a couple of people so might have to start again ,anyone got one cheap?.