Petesvw 0 Posted January 15, 2007 Report Share Posted January 15, 2007 Hope all is well G man ; ) Link to post Share on other sites
mike 6 Posted January 16, 2007 Report Share Posted January 16, 2007 Sorry to hear about your loss mate all the best an good luck with the project Link to post Share on other sites
Dubsingh 0 Posted January 20, 2007 Author Report Share Posted January 20, 2007 car will be ready for paint shop fingers crossed in wo weeks time just a few tweaks to be done here n there need to source a rallye wind screen in the mean time Link to post Share on other sites
Dubsingh 0 Posted January 20, 2007 Author Report Share Posted January 20, 2007 gonna refurb the engine guys what shall i do while im at it as it will be in bits plz post ideas and bits defo need to be done on a vr engine migh aswell do it properly Link to post Share on other sites
petervr6 0 Posted January 21, 2007 Report Share Posted January 21, 2007 def do the chains and guides clutch while you at it. Link to post Share on other sites
rodney 17 Posted January 21, 2007 Report Share Posted January 21, 2007 The main bits are the chains and guides as mentioned. If it is in bits then hows your clutch and Tappets? Finally filters and Fluids all round (Oils & Fuel)!If your engine was in good fettle before then I do not see the need to replace all the seats (big/little ends, rings etc...). Of course you can do them if you feel you will benefit and your engine is in bits after all !Then theres mods - Cams, Port and Polish, etc...? Link to post Share on other sites
Mr_GTI 0 Posted January 21, 2007 Report Share Posted January 21, 2007 car will be ready for paint shop fingers crossed in wo weeks time just a few tweaks to be done here n there need to source a rallye wind screen in the mean timeShould of had that off me as well then?? Its all gone now mind you, most of it ended up in america Link to post Share on other sites
sparkz 0 Posted January 21, 2007 Report Share Posted January 21, 2007 Lighten and balance bottom end, forged pistons, rods, port and polish head. The list is endless, it just depends on how deep is your pocket? Mine's cost me nearly £2500 so far and it still looks like a bare block!! Link to post Share on other sites
Dubsingh 0 Posted January 29, 2007 Author Report Share Posted January 29, 2007 Lighten and balance bottom end' date=' forged pistons, rods, port and polish head. The list is endless, it just depends on how deep is your pocket? Mine's cost me nearly £2500 so far and it still looks like a bare block!![/quote']hahha damn.....gonna have to start hunting again now.....decided to rebuild the engine to normal spec but use apr bolts....and go to town on the head may be big valves etc.....managed to get stage two chip and pully setup including extra wrap round pully from fleabay for 27 quid...great deal....just need to source sum injectors and i think it was sparks who pointed me towards the right people...shouls have some nice green tops soon Link to post Share on other sites
Dubsingh 0 Posted March 30, 2007 Author Report Share Posted March 30, 2007 hey guiys its been a while since i updated im still around just had lots of uni work to do and a disso .... will be working on the car over easter but found a lil video of my car fdlyin around cov thought id post it up sorry for crap quality its of a phone....had some guy in a pub tryin to say its his car and his mate was recordin him.....and out of all people he was showing it to me T**T lolhttp://s111.photobucket.com/albums/n154/Dubsingh/?action=view¤t=Video006.flv Link to post Share on other sites
Dubsingh 0 Posted March 30, 2007 Author Report Share Posted March 30, 2007 hey guiys its been a while since i updated im still around just had lots of uni work to do and a disso .... will be working on the car over easter but found a lil video of my car fdlyin around cov thought id post it up sorry for crap quality its of a phone....had some guy in a pub tryin to say its his car and his mate was recordin him.....and out of all people he was showing it to me T**T lolhttp://s111.photobucket.com/albums/n154/Dubsingh/?action=view¤t=Video006.flv Link to post Share on other sites
Dub-Donna 0 Posted March 30, 2007 Report Share Posted March 30, 2007 Bet he felt silly ;-) LolNice to know that your car is so good someone else pretends it's his!! Link to post Share on other sites
Dubsingh 0 Posted April 1, 2007 Author Report Share Posted April 1, 2007 i knw tell me about it i hate it when ppl do that dnt knw wot they get from it lol Link to post Share on other sites
Dubsingh 0 Posted March 11, 2010 Author Report Share Posted March 11, 2010 long over due update lol lol just a few pics of the engine with trial mounted vortech.....needs a lil modification so that the pulleys line up it seems to be off by a toothand one pic of the new toy got a few plans if all gose well this year Link to post Share on other sites
Ben Seabrook 4 Posted March 11, 2010 Report Share Posted March 11, 2010 looking good mate is the new toy the one in the foreground or the background of that last pic !!!! Link to post Share on other sites
Dubsingh 0 Posted March 11, 2010 Author Report Share Posted March 11, 2010 background ;-) ben lol Link to post Share on other sites
Ben Seabrook 4 Posted March 11, 2010 Report Share Posted March 11, 2010 lol :) car looks mint mate, got any more recent piccy's ?? Link to post Share on other sites
Dubsingh 0 Posted March 11, 2010 Author Report Share Posted March 11, 2010 will do once the engine bay is painted up hopefulkly this weekend. Link to post Share on other sites
MJ Vr6 79 Posted March 11, 2010 Report Share Posted March 11, 2010 DuBSingh, who does your bodywork mate..? Link to post Share on other sites
Dubsingh 0 Posted March 12, 2010 Author Report Share Posted March 12, 2010 we do all body work why?? Link to post Share on other sites
MJ Vr6 79 Posted March 12, 2010 Report Share Posted March 12, 2010 May need a quote on my MK1 dude.. Link to post Share on other sites
Dubsingh 0 Posted March 12, 2010 Author Report Share Posted March 12, 2010 no probs let me knw whats needed Link to post Share on other sites
MJ Vr6 79 Posted March 12, 2010 Report Share Posted March 12, 2010 Teekh tark-Cheers dude! Link to post Share on other sites
Recommended Posts