six appeal 53 Posted February 16, 2016 Report Share Posted February 16, 2016 As per title.... SCHRICK Inlet manifold and all ancillaries for VR6 Engine. Selling my spare fully refurbed Schrick Manifold for a VR6 engine. Has been aqua blasted and all bolts re-newed, so literally needs fitting as looks better than new! Was for my Supercharged Mk2 VR but going another route with that now so is surplus to my needs. Currently has an OBD1 throttle body adapter fitted, but OBD2 adapters still readily available both new and second hand. Came off a Stealth tuned VR6 Corrado but will fit all VR6 engines. This is the one for sale: This is how they can look fitted (although this is an old pic of my OBD2 one, not the one advertised!): I want as close to £1200ono as I can for it, but could be negotiable on price with cash! PLEASE leave a message on here or PM me as only got my number on here to keep within forum rules as I work Shifts and can't always answer the phone. Thanks, Simon. richierich37 and VR6Pete 2 Link to post Share on other sites
VR6Pete 1,455 Posted February 16, 2016 Report Share Posted February 16, 2016 Would love another schrick on my VR6 and wish I had that type of money! looks like new! theyve held their value very well over the years! Good luck with the sale mate. six appeal 1 Link to post Share on other sites
six appeal 53 Posted February 17, 2016 Author Report Share Posted February 17, 2016 It's actually in better condition than the one on my Mk3 Pete, literally as new after the aqua blasting and new bolts etc. Sure i could sort you some sort of deal out if you really want it............... Simon. VR6Pete 1 Link to post Share on other sites
VR6Pete 1,455 Posted February 17, 2016 Report Share Posted February 17, 2016 I'm sure that @hvr6 had an adaptor plate for a schrick. Maybe if Helen still has it might be useful for any potential buyer. six appeal and hvr6 2 Link to post Share on other sites
hvr6 88 Posted February 17, 2016 Report Share Posted February 17, 2016 2 hours ago, VR6Pete said: I'm sure that @hvr6 had an adaptor plate for a schrick. Maybe if Helen still has it might be useful for any potential buyer. I do have a TB adaptor but it's for OBD1 but thanks for the plug VR6Pete and six appeal 2 Link to post Share on other sites
Rysa@VRT 31 Posted March 6, 2016 Report Share Posted March 6, 2016 Did you say Obd1 ??? six appeal 1 Link to post Share on other sites
six appeal 53 Posted March 6, 2016 Author Report Share Posted March 6, 2016 28 minutes ago, Rysa@VRT said: Did you say Obd1 ??? Yeh currently has an OBD1 throttle body plate on it, but OBD2 plates are readily available Simon. Rysa@VRT 1 Link to post Share on other sites
Jordan. P 1 Posted April 20, 2016 Report Share Posted April 20, 2016 Is this still for sale? six appeal 1 Link to post Share on other sites
six appeal 53 Posted April 22, 2016 Author Report Share Posted April 22, 2016 Yes mate, still got it for sale....... Simon. Link to post Share on other sites
six appeal 53 Posted May 3, 2016 Author Report Share Posted May 3, 2016 Deposit Taken....... Simon. VR6Pete 1 Link to post Share on other sites
c00k 435 Posted May 4, 2016 Report Share Posted May 4, 2016 (edited) Could make the converter plates your self, 8 holes, 4 of them tapped to M6, 4 of them resscessed. 76mm hole saw for large Center hole. Cut the out side shape with an angle grinder. Plillar drill would be best for drilling, plus very accurate measurement and centre punching. or any machining or metal fabricators should be able to make them easily. Edited May 4, 2016 by c00k Link to post Share on other sites
hvr6 88 Posted May 4, 2016 Report Share Posted May 4, 2016 I don't have a 'converter plate' for sale then.... it's a whole piece.... Link to post Share on other sites
hvr6 88 Posted May 4, 2016 Report Share Posted May 4, 2016 glad you've sold your Schhhhhhrick Simon Bealieboy and six appeal 2 Link to post Share on other sites
rich 40 Posted May 5, 2016 Report Share Posted May 5, 2016 ooohh,shiney bits....nice Link to post Share on other sites
six appeal 53 Posted May 10, 2016 Author Report Share Posted May 10, 2016 **SOLD** Link to post Share on other sites
Recommended Posts