Jump to content

Recommended Posts

  • Replies 213
  • Created
  • Last Reply

Top Posters In This Topic

Enough you fools!

Tomorrows action plan should see us fitting the oil feed, water pipes and boost hoses.

Front end back on and fuel tank wiring

Once thats done, the interior can go back in and then its just welding and fabrication works..

Coffee and croissants will be ready from 8!

Link to post
Share on other sites

Update from saturday....

Thanks to Parkie, Russ and Bungy for offering services for the morning..

so we managed to get:

the fuel tank pump and wiring sorted

Fuel pump and filter in position

Up rate the vr fuel lines

Installed the brake line extensions

Mounted the intercooler

Fitted the rad and water hoses

Fitted the boost hoses

Got the carpets back in and the seats in position.

Sorted the boot out as now finished!

Started to template the exhaust pipework

Since then I have now ordered new 76 nd 63mm boost hoses and pipework, and sourced an amazingly cheap turbo replacement or the old t3/t4!

And sourced exhaust bits to modify tonys 3"er ;)

9c1d4d2b.jpg

83472279.jpg

a44459bd.jpg

36e6f867.jpg

34897591.jpg

b0710dfd.jpg

Plan for this saturday is:

Swap wheels for audi peperpots

Bleed brake lines

Install new boost hoses and re-route pipework

Fit new turbo

Make up / modify exhaust (have ordered a 2.5"-3" adaptor and a 20degree angle for downpipe)

Cut and shut seat runners for buckets..

Wire up fuel pump

Install dash board and associated bits

Fit battery

Fill up with petrol and turn key!

Scratch head.......... :)

Link to post
Share on other sites

×
×
  • Create New...