spadam 7 Posted February 5, 2010 Report Share Posted February 5, 2010 Ok so id be looking for a 4 motion box then. Its a daily driver so would be looking at over engenering everything to keep it realiable and no i wouldnt be flooring it at every chance i get. Dont earn enough to pay for the fuel to do that lol. Link to post Share on other sites
Stealth Racing 5 Posted February 5, 2010 Report Share Posted February 5, 2010 Can't say fairer than that guys. He's been my 'Uncle Vince' for 10 years now and kept me sane!! :-)Fook hasn't that 10 yrs flown by?I think we should start dropping the uncle stuff now... suddenly I'm feeling old and I'm only 39 yrs and about 1370 days old :-* butcher16v 1 Link to post Share on other sites
Stealth Racing 5 Posted February 5, 2010 Report Share Posted February 5, 2010 Ok so id be looking for a 4 motion box then. Its a daily driver so would be looking at over engenering everything to keep it realiable and no i wouldnt be flooring it at every chance i get. Dont earn enough to pay for the fuel to do that lol.We put a lot of thought into our turbo choice mainly because of the VR transmissions we think it will be fine with stage 1. (360bhp)Mechanical sympathy goes a heck of a long way though, plenty of VR's out there running 400bhp + with OEM boxes Link to post Share on other sites
spadam 7 Posted February 6, 2010 Report Share Posted February 6, 2010 Didnt realise this thats made my mind up then. Think 360bhp will keep me happy till i can afford my skyline lol just gota save my money now to get chains done then turbo. Link to post Share on other sites
Stealth Racing 5 Posted February 6, 2010 Report Share Posted February 6, 2010 Didnt realise this thats made my mind up then. Think 360bhp will keep me happy till i can afford my skyline lol just gota save my money now to get chains done then turbo.If you are doing the chains make sure a Helix or similar clutch goes in at the same time..That way it's ready for turbo.... It will save a bit of expense later on Link to post Share on other sites
bungy 2 Posted February 6, 2010 Report Share Posted February 6, 2010 Is this available for the 4mo?Any idea's... Link to post Share on other sites
Stealth Racing 5 Posted February 6, 2010 Report Share Posted February 6, 2010 Hopefully later on this year we will be looking at 4mo and R32 Kits... :-dWe have already done some work here but we put it on hold as we decided VR6 kits was more of a priority, as I don't own neither of the above cars. Big big power to come from 24V's :-d Link to post Share on other sites
bungy 2 Posted February 6, 2010 Report Share Posted February 6, 2010 Maybe use mine as a test bed. I'm off to the states for 3 months later in the year. Link to post Share on other sites
Stealth Racing 5 Posted February 6, 2010 Report Share Posted February 6, 2010 Maybe use mine as a test bed. I'm off to the states for 3 months later in the year.I can see an arrangement coming on :-d Link to post Share on other sites
bungy 2 Posted February 6, 2010 Report Share Posted February 6, 2010 It will only be sat in my garage for three months otherwise Link to post Share on other sites
Stealth Racing 5 Posted February 6, 2010 Report Share Posted February 6, 2010 When in the year are you going? maybe we should have a proper chat about this some time? Link to post Share on other sites
bungy 2 Posted February 6, 2010 Report Share Posted February 6, 2010 pm sent Link to post Share on other sites
spadam 7 Posted February 7, 2010 Report Share Posted February 7, 2010 I like where this is going bungy problem is now i thinking do i sell the vr and go get a 4motion as stronger gearbox, 4wd etc. oh no im thinking again this isnt good. Link to post Share on other sites
FishWick 21 Posted February 8, 2010 Report Share Posted February 8, 2010 Can't say fairer than that guys. He's been my 'Uncle Vince' for 10 years now and kept me sane!! :-)Fook hasn't that 10 yrs flown by?I think we should start dropping the uncle stuff now... suddenly I'm feeling old and I'm only 39 yrs and about 1370 days old :-*It certainly has! Good to see you back into Turbos again though :-)Looking forward to the 24V kits! I might leave my 24V engine install for a bit then ;-) Link to post Share on other sites
Nex 17 Posted February 8, 2010 Report Share Posted February 8, 2010 Right time to start saving for when the 24v kits come along Link to post Share on other sites
Sidhu88 1 Posted February 12, 2010 Report Share Posted February 12, 2010 I dont know whether its due to me using firefox, but it seems i have the same problem with IE, but when i try to access the VR6 tuning part of your website it doesn't do anything, just sticks to the homepage. any ideas? Link to post Share on other sites
rodney 17 Posted February 12, 2010 Report Share Posted February 12, 2010 some aspects are premium membership... but I am sure they will confirm shortly..PS join up anyway. £15 for 15% off your insurance has to be a no brainer anyway... Link to post Share on other sites
H13VYY 0 Posted February 12, 2010 Report Share Posted February 12, 2010 i use firefox but have no problems. must be because your not a premium member lol. Link to post Share on other sites
VR6Pete 1,455 Posted February 12, 2010 Author Report Share Posted February 12, 2010 Theres no restrictions on VR6 Tuning forum section - anyone can post in there Link to post Share on other sites
Sidhu88 1 Posted February 12, 2010 Report Share Posted February 12, 2010 lol apologies, i should of specified in the first original post. I meant on the stealth racing site Link to post Share on other sites
Stealth Racing 5 Posted February 13, 2010 Report Share Posted February 13, 2010 lol apologies' date=' i should of specified in the first original post. I meant on the stealth racing site[/quote']Hi.... Yes sorry about the website, it's a bit (lot) out of date, also since moving it to a new server there have been some problems..Pete and I will get together at some point and get it all sorted.For now best to email or call for any info you need.... Cheers Vince Link to post Share on other sites
VR6Pete 1,455 Posted February 13, 2010 Author Report Share Posted February 13, 2010 Ahh, yes, its on list of things to do Link to post Share on other sites
joules 0 Posted March 24, 2010 Report Share Posted March 24, 2010 What sort of brake setup do you suggest for that sort of power? For example if you wanted to keep the oem look and the standard 15" rims? *-) Ta 8-| Link to post Share on other sites
spadam 7 Posted March 24, 2010 Report Share Posted March 24, 2010 Not many options if you want to keep your 15inch rims unless you get braided hoses, new disks, uprated pads etc. Pretty sure there is 1 set of 15inch wheels which fit over 312mm brakes not sure what there called tho. Think tony and craggsy have them. Link to post Share on other sites
Ben Seabrook 4 Posted March 24, 2010 Report Share Posted March 24, 2010 Not many options if you want to keep your 15inch rims unless you get braided hoses' date=' new disks, uprated pads etc. Pretty sure there is 1 set of 15inch wheels which fit over 312mm brakes not sure what there called tho. Think tony and craggsy have them.[/quote']they are compomotive mo's Link to post Share on other sites
Recommended Posts