Jump to content

Nats VR6 Build Thread... New Paint! :) Page 14


Recommended Posts

Hey, i thought its about time i started my own thread for my lil VR as i seem to be doin a fair bit to him over time.... so gonna start with a few pics of how he was when i got him back in december....

1247512399_8829_FT0_ss16122008807_.jpg

1247512399_8829_FT0_ss16122008808_.jpg

1247512399_8829_FT0_ss16122008820_.jpg

So totally standard, 94k on the clock, FSH, only 2 owners.... £1700 :) :) and i was bloody away, 1st time vr owner and lovin it!!!

Stayed that way til January when i put it thru a service and put some wheels on....

Then it looked like this...

1247512575_8829_FT0_n751885852_2538492_5105_.jpg

1247512575_8829_FT0_n751885852_2563152_7880_.jpg

Then came the list....

I then replaced

Ht leads

Battery

ABS panel on dash

ABS pump

Cam Cover Gasket

Pedal Box (only thing not done by me)

New oil and filter again

front brake discs (brembo vented)

and pagid pads

and i added....

BMC panel filter

Debadged grille

black side repeaters

Gaz fully adjustable coilovers

Deep chin front splitter

New number plates and holders

Front upper strut brace

Bonnet lifters

De wipered the back window

Painted my engine cover

Removed all the silly stickers

Also had to replace one wheel at cost of 220 (f**kin potholes)

and now he looks like this (for now....)

1247513285_8829_FT0_4744_113648025852_751885852_3209077_743794_n_.jpg

1247513285_8829_FT0_6375_126829460852_751885852_3454665_941250_n_.jpg

1247513285_8829_FT0_6375_128599070852_751885852_3487364_5825207_n_.jpg

1247513285_8829_FT0_6375_128599085852_751885852_3487367_1341501_n_.jpg

1247513285_8829_FT0_6375_128599095852_751885852_3487368_936459_n.jpg

1247513285_8829_FT0_6375_126827760852_751885852_3454645_2960713_n_.jpg

Im now having some time off as i have just replaced the chains on my baby and it has screwed my plans up a bit, (i will add these pics to the thread in a min)

so im gonna see out the show season as he is and save up over the winter and get the other bits done.....

So there you go, thats the life of my VR since i got him in december.... dont think ive done bad for someone so small!!! hahahaha. :) :) :)

Link to post
Share on other sites
  • Replies 167
  • Created
  • Last Reply

Top Posters In This Topic

Guest Nero1701

Thats quite a list mate,

When i get home next week i'll start my thread also.

Loads of good work there nat, perhaps you could do a write up on a few of the mods and how you done it for other people's reference

Link to post
Share on other sites

I then replaced

Ht leads

Battery

ABS panel on dash

ABS pump

Cam Cover Gasket

Pedal Box (only thing not done by me)

New oil and filter again

front brake discs (brembo vented)

and pagid pads

and i added....

BMC panel filter

Debadged grille

black side repeaters

Gaz fully adjustable coilovers

Deep chin front splitter

New number plates and holders

Front upper strut brace

Bonnet lifters

De wipered the back window

Painted my engine cover

Removed all the silly stickers

Also had to replace one wheel at cost of 220 (f**kin potholes)

you missed out 'elbow grease. I think that's what has made the biggest difference

Link to post
Share on other sites

The most recent update to my vr is the timing chains have been done, i spent the day down at Tony's in Kent and took the whole engine out, put in new chains, guides and tensioners, also while i was there i was going to replace the clutch, but luckily enough for me the one in there was well good so didnt need doing.

So i stuck some new gearbox oil in and a whole new set of G12++ coolant... mmmm he's lovely and fresh now... as he had an oil and filter change only 2 weeks ago!!! :) :) :)

So here's some pics of how the day went... we started at about 11 am.... and by 1pm this is where we were at.....

1247514253_8829_FT300321_ss110720092049_.jpg

1247514183_8829_FT300321_ss110720092051_.jpg

1247514183_8829_FT300321_ss110720092052_.jpg

1247514183_8829_FT300321_ss110720092054_.jpg

1247514183_8829_FT300321_ss110720092057_.jpg

1247514183_8829_FT300321_ss110720092061_.jpg

1247514183_8829_FT300321_ss110720092064_.jpg

1247514183_8829_FT300321_ss110720092068_.jpg

than tony cracked the engine open and got to the chains..... while i got on with what i do best, polished the engine bay....

1247514494_8829_FT300321_ss110720092075_.jpg

1247514411_8829_FT300321_ss110720092071_.jpg

1247514411_8829_FT300321_ss110720092083_.jpg

1247514494_8829_FT300321_ss110720092090_.jpg

Then in went the lovely new chains and the car got put back together!!!! :) :)

1247514630_8829_FT300321_ss110720092078_.jpg

1247514630_8829_FT300321_ss110720092093_.jpg

1247514630_8829_FT300321_ss110720092095_.jpg

1247514630_8829_FT300321_ss110720092096_.jpg

And once he was back together, he started first time, and not one vag com code, not one leak, rattle or loose anything... i must say i was really impressed.... Im one of the worst ppl to help out as i hate anyone touchin my vr and there isnt many i trust, but Tony did a great job and now my car is lovely and new again!!!! :) :) :)

That really is it now, until the winter then ill see what i can come up with by next show season!!! :) :) :)

Link to post
Share on other sites

oooh i lied!!

I didnt fit my ABS pump or coilovers, but other than that i believe ive done everything, would be happy to help anyone where i can, i dont know as much as some but i know more than others if you know what i mean?! lol....

Thanks for your comments too guys, esp you Nige!!! It has taken a lot of hard work to get him to where he is today and a lot of good detailing products to get that bodywork lookin as good as it does too... prob spent over 80 hours cleaning and polishing the outside alone!!! Ive spent more time and effort on this car than i have anything in my life, but after 8 months i think it is finally starting to show.... :) :) :)

And tony, yes, i have a fabulous rear end thank you and i think my bra is very smart too!! ;) lol

Link to post
Share on other sites

and yeah, i actually thought i was gonna be sick for a minute, and it took me about 2 hours to calm my heart rate down and to breath properly, i did think at one point i had to sit down cuz the constant panic was too much for me to cope with, but i got used to it and glad i trusted Tony with this job, no way would i have let any old garage do that to my baby.... lol. :) :)

Link to post
Share on other sites

Looking good folks nice work tony your becoming our online alcoholic mechanic every pic is either pissed or engine in hand............... Your living the dream fella living the dream lol.

Cars looking gleaming as usual Nat bet you scrubbed that bay when the lump was out auto glym at the ready lol.

Can imagine tony laying with a VR engine squashing his arm screaming "help" and Nat in the background saying Hold on a second just polishing this a minute. lol

Link to post
Share on other sites

Ahh thanks, i know i havent really done much to mine, only lil bits, but that is all my budget will allow for the moment (then a few hundred on top) lol, but yeah, from where he's come from to where he is today im well happy. :) :) :)

and to be honest Craig there wasnt really that much wear... there was some slight grooves on the back of the guides, but not as much as i would have expected but i think it might partly be down to the chain stretching over time as the rattle was def bad enough to make me wanna get them done!! lol.

Ive left them at tony's too so cant even take pics now.... didnt think of that!! Doh! haha.

Link to post
Share on other sites

u cheeky bugger lol they went out with the rubbish today at work i think sorry peeps but as nat said it was more the chains than anything the guides had groves but seen worse but seen better .... have to say nat did a brillant job on the engine bay while i played with her gear box ;) ,,,, and was nice to have someone who would help out and get stuck in

Link to post
Share on other sites

looking good hun like the last two pic the best sweet rear end and ur bra ;):)

LOL!

Nice build thread nat, you should deffo do some walk through thingies in the members area for thick people like me to save me some money by taking my car to the garage to get alot of things done ;)

Link to post
Share on other sites

Thanks Tony i loved gettin my hands dirty and learning more stuff about the vr, it was great fun!!!

And thanks Anna and Kieron, i dont really know that much, but always willing to give it a go and try myself first, ive saved hundreds by just givin it a try and not running straight to the nearest garage... FTW!! :) :) :)

Link to post
Share on other sites

Thanks for your comments guys!!!

And sorry Gav mate couldnt make it to Bug Jam, had too much s**t goin on here, but i think it may be calming down now so will hopefully still be at london volksfest, you coming to that one? :) :)

Link to post
Share on other sites

×
×
  • Create New...