DAZVR6 0 Posted April 6, 2008 Report Share Posted April 6, 2008 Took my car up to Aweseme gti yesterday as part of a rolling road day and my car got 191.4 bhp and 173llbs/torque. Are these good figues for a vr..? My mods are induction kit, 6-2-1 manifold, decat, and full stainless exhaust oh and its a obd2 engine and was running v-power. Link to post Share on other sites
bulldog 2 Posted April 6, 2008 Report Share Posted April 6, 2008 Don't know if it's good, but sounds it to me, I'd be happy with that power figure if it were mine. Link to post Share on other sites
VR40 0 Posted April 6, 2008 Report Share Posted April 6, 2008 yea that's not too bad at all VW quote a power figure of 174bhp from the factory. The engines vary so much though depending on how hard their lives have been lol.I had a 1997 OBD2 that made 199bhp and it was standard except from a ram air filter. Link to post Share on other sites
blondie 0 Posted April 6, 2008 Report Share Posted April 6, 2008 174 for an OBD1 gregoby:)OBD2 never had a figure as they all variedMines at 198 with an air filter. Link to post Share on other sites
craggsy 91 Posted April 6, 2008 Report Share Posted April 6, 2008 [cough]202bhp[/cough] Link to post Share on other sites
Samson 0 Posted April 7, 2008 Report Share Posted April 7, 2008 Blondie i love you!!!A girl that knows what she is talking about when it comes to cars!!! Link to post Share on other sites
mike 6 Posted April 7, 2008 Report Share Posted April 7, 2008 191 is a good figure tbh, obd2 were rated as 174 too afaik, but most people tend to think they push out around 185 Link to post Share on other sites
blondie 0 Posted April 7, 2008 Report Share Posted April 7, 2008 I was sure na OBD2 was newhere between 174-185.......... Link to post Share on other sites
binliner 0 Posted April 7, 2008 Report Share Posted April 7, 2008 Took my car up to Aweseme gti yesterday as part of a rolling road day and my car got 191.4 bhp and 173llbs/torque. Are these good figues for a vr..? My mods are induction kit' date=' 6-2-1 manifold, decat, and full stainless exhaust oh and its a obd2 engine and was running v-power.[/quote']Figures vary on different rollers but mine made 189bhp and it's totally standard Link to post Share on other sites
Jk* 0 Posted April 7, 2008 Report Share Posted April 7, 2008 Yeah, sounds about right. It always depends on where you go, how well the rollers are set up etc.. as some people found out on Sat @ TSR. Link to post Share on other sites
jesterwalker69 0 Posted April 7, 2008 Report Share Posted April 7, 2008 [cough]202bhp[/cough]Is that all fella?! see below for mine, and thats with just a Ram Air filter and exhaust. Link to post Share on other sites
MJ Vr6 79 Posted April 7, 2008 Report Share Posted April 7, 2008 Yeah' date=' sounds about right. It always depends on where you go, how well the rollers are set up etc.. as some people found out on Sat @ TSR. [/quote']JK, your rite dude, Many rollers Differ.. Alot to do with calibration, wheels, heat of engine etc.. You can never get a 100% correct readin!!!! Some fockers just push ya car OTT, and dont get the car done on R/R correctly!! Link to post Share on other sites
DAZVR6 0 Posted April 7, 2008 Author Report Share Posted April 7, 2008 Is there any benefit to fitting a 2.9 throttle body and manifold on a obd2..? and what about leads, any point..? Link to post Share on other sites
Ciaran 4 Posted April 9, 2008 Report Share Posted April 9, 2008 there is a point in leads not sure about the throttle body and manifold thoughoh and i made 198.1 BHP and 183 lb/ft torque with a scorpion exhaust and ram air Link to post Share on other sites
shail 0 Posted April 10, 2008 Report Share Posted April 10, 2008 Here are links to some RR results run from VR6OC to give you an idea. Results from Stealth Racing RR day: http://www.clubgti.com/forum/archive/index.php?t-41145.html (results near bottom of page)Not sure where these were done: http://www.vr6oc.com/results.html Link to post Share on other sites
Recommended Posts