Jump to content

superted23

Club Member
 View Profile  See their activity

  • Content Count

    49

  • Joined

  • Last visited

 Content Type 

Everything posted by superted23

  1. superted23
    Thank you vr6turbo, found a replacement but it turns out the head gasket may have gone. Do you know where to get decent head gaskets and seals plus head bolts? Also a timing set, might as well do the lot if i have to take to top off cheers
  2. superted23
    I'm looking for either a part for sale or someone In the Hampshire area with a 357 919 506B Radiator Fan Relay to try fitting in my car to see if that is the fault before replacing Many thanks Edd
  3. superted23

    The VR as developed a noise at the back or lower part of the engine, if the diff is starting to go will it give signs or just go?

     

    anyone?

  4. superted23

    superted23

    superted23 posted a Community Map marker in Members

  5. superted23
    many thanks, have a feeling that it was removed when the shell was sprayed.
  6. superted23
    Hello, do you have the colour code you used to spray your car - looks very similar to mine, I have to get front wings replaced and re-sprayed cheers
  7. superted23
    Might be a silly question but are the front wings on a Mk3 Golf VR6 the same as the GTI or standard Mk3? I'm after a pair as mine are shot
  8. superted23
    Name: VW Golf Mk3 (1995) Date Added: 06 September 2015 - 05:03 PM Owner: superted23 Short Description: None Provided View Vehicle
  9. superted23
    Hello people, if anyone knows of any decent engines for sale i need one for my 1995 mk3 vr6 (AAA ODB1 with coil pack) any info or offers greatly appreciated many thanks
  10. superted23
    many thanks
  11. superted23
    I know this is an old post but I am after some advice off you guys as it looks like im going down the same route with the R32 engine. I have found a mk5 R32 engine, is it possible and how easy is it to fit into a mk3 vr6, will it fit the vr6 gear box and where could I get the conversion ecu and looming for plug and play? help !
  12. superted23
    cheers for the reply, having a few issues finding your thread any chance you can link it on here, many thanks
  13. superted23
    A little help needed people, I have got a 1995 VR6 where the engine has died and I have managed to find an R32 engine, how easy is this to fit and do any of the ancillaries fit across? will it need an R32 ecu and will that fit the VR6 fuse board with a plug and play? Any advise needed many thanks
  14. superted23
    does anyone know if these are the same as on the mk3 gti and are they expensive to get a pair new, just had the paint work re-done but one of the plastic sill skirts/covers was damage when taken off for body welding any advise or help welcome
  15. superted23
    can someone please tell me the difference between an ODBI adapter for VAG.COM and an ODBII adapter? can you use and ODBII on and ODBI car? many thanks
  16. superted23
    cheers dude, i will pop up to local garage this weekend and get them to do it, if not i will be in touch, many thanks
  17. superted23
    where is the abs pump on an ODBI engine set up and is there anyway of manually bleeding or purging without vag.com?
  18. superted23
    i have just done a front caliper change and a full system bleed, when the engine is off i get very positive feedback from brake pedal and can only move it a few centremetres but once i start the engine i can put the pedal to the floor and get very little brake power. can any one help please
  19. superted23
    are these the same on both the golf and corrado as i need a new caliper for my golf and there are some on sale on ebay any help is greatly appreciated
  20. superted23
    did you find out the problem? i have similar issue
  21. superted23
    did you ever find out what the problem was as i have a similar problem, brakes work fine, i bleed clutch and after a few minutes driving i have nothing once again. when bleeding its like a white foamy mixture. think a seal has gone in cylinder but cant get car to garage to have it checked out
  22. superted23
    cheers dude, thats a great help,
  23. superted23
    i should have replied to this way back at the time but was busy tinkering, i took the dials out and disconnected the immobiliser box behind the dash, cleaned the connectors and it works fine as far as I know, I still have the problem of erratic revs every now and then but I can live with that for the speed, noise and joy or a vr
  24. superted23
    has anyone heard of this company and are these any good? looking for a upgrade set for 15" alloys as im looking to supercharge vr and wanted better stopping power http://www.ruderacing.co.uk/Brakes-Big_Brake_Kits-VW_Big_Brake_Kits-VW_Golf_Mk3_Big_Brake_Kits/c1697_6510_6575_6578/p483730/285mm_4-Pot_Kit_for_VW_Golf_Mk3_VR6/product_info.html
  25. superted23
    did you ever get to the bottom of this as i have similar symptoms but i have now replaced th ecu relay, crank and cam shaft sensors, new leads, and plugs, to now luck ?
×
×
  • Create New...