Ciaran 4 Posted February 17, 2005 Report Share Posted February 17, 2005 basically the loudest one that can be bought?also what exhaust to fit and is it worth de-catting the car?also considering 6-2-1 manifold how much and where from?what gains would be expected from and induction kit decat exhaust with 6-2-1 manifold? Link to post Share on other sites
Slim 0 Posted February 17, 2005 Report Share Posted February 17, 2005 The RamAir Proram one is pretty loud, that's what I have, might get better on the road performance from a BMC CDA one though, or a Carbonio, but you'll pay a lot more for one of those.Supersprint is the best exhaust system you can fit to your VR, they also do a manifold but it's around £600, you'll get the system fitted perfectly by Star Performance in Fife. They advised me against paying a bit extra for a de-cat as it won't improve the performance any and you'll need it for the MOT.From all of that, you should be getting 190-195bhp I'd estimate. Link to post Share on other sites
Geastb 0 Posted February 17, 2005 Report Share Posted February 17, 2005 There is a 6-2-1 s/s manifold on ebay at the moment - might be worth a look? Link to post Share on other sites
Ciaran 4 Posted February 17, 2005 Author Report Share Posted February 17, 2005 slim u from aberdeen i see!!sitting in altens at the minsaw a manifold in a magazine last night for £350 Link to post Share on other sites
Nerih 0 Posted February 17, 2005 Report Share Posted February 17, 2005 imo bmc is a good choice, u get good power increase, it looks good too, just watch the parts needed for fitting :/ Link to post Share on other sites
Slim 0 Posted February 17, 2005 Report Share Posted February 17, 2005 slim u from aberdeen i see!!sitting in altens at the minsaw a manifold in a magazine last night for £350Altens? Me too.Where you working at? I'm down at Andergauge at the bottom of Hareness Road.You need to get yourself onto www.eastsidevw.co.uk it's a site for the local VW scene, over 100 members so far. Link to post Share on other sites
Ciaran 4 Posted February 17, 2005 Author Report Share Posted February 17, 2005 aberdeen college for this week and next till i finish college and go offshore some time in the near future. il check out the site now loon. rather freeky coincidence current car green pug 306 diesel sitting on the road just up from iains van!wheres hareness road? Link to post Share on other sites
Slim 0 Posted February 17, 2005 Report Share Posted February 17, 2005 Same road I think, look down towards the sea, I'm the big blue building with the red strip just after the roundabout. My VR6 Highline on polished TT rims should be in the car park (I hope). Link to post Share on other sites
Ciaran 4 Posted February 17, 2005 Author Report Share Posted February 17, 2005 no different side of the college know where u r now about 200yrds away! will drive past for gander at dinner time may even pay u a visit at some point to see what u have done to her! Link to post Share on other sites
VR6Pete 1,455 Posted February 17, 2005 Report Share Posted February 17, 2005 Personally I'd go for a BMC CDA Link to post Share on other sites
Ciaran 4 Posted February 17, 2005 Author Report Share Posted February 17, 2005 well BMC it is then.mate has one on a clio cup and managed to hit the limiter in 5th the day he put it on! speedo reading about *52. Link to post Share on other sites
VR6Pete 1,455 Posted February 17, 2005 Report Share Posted February 17, 2005 contact stealth racing on 01926 812259, they will sort you out with a kit, they also send out the rubber connector that most distributers dont bother putting in with the kit! http://www.stealthracing.co.uk/ Link to post Share on other sites
binliner 0 Posted February 17, 2005 Report Share Posted February 17, 2005 "other stockists are available" Link to post Share on other sites
VR6Pete 1,455 Posted February 17, 2005 Report Share Posted February 17, 2005 yes. but the majority of them dont include the rubber adaptor as per the people who took part in that group buy fount out Link to post Share on other sites
binliner 0 Posted February 17, 2005 Report Share Posted February 17, 2005 I was joking... like they say on the bbc evertime they mention a brand name Link to post Share on other sites
VR6Pete 1,455 Posted February 17, 2005 Report Share Posted February 17, 2005 oh rite lol Link to post Share on other sites
Ciaran 4 Posted February 18, 2005 Author Report Share Posted February 18, 2005 by the way slim tidy motor u have their joy .liking the rims look sweet as and the german style plate! Link to post Share on other sites
Slim 0 Posted February 18, 2005 Report Share Posted February 18, 2005 It'll look better when I've finished doing what I want to do with it over the next few months. Link to post Share on other sites
Ciaran 4 Posted February 18, 2005 Author Report Share Posted February 18, 2005 whats the plans like? Link to post Share on other sites
Slim 0 Posted February 18, 2005 Report Share Posted February 18, 2005 A lot of smoothing and lowering for starters. Link to post Share on other sites
Geastb 0 Posted February 18, 2005 Report Share Posted February 18, 2005 yes. but the majority of them dont include the rubber adaptor as per the people who took part in that group buy fount out Has anyone got a pic of the missing rubber conector? Link to post Share on other sites
VR6Pete 1,455 Posted February 18, 2005 Report Share Posted February 18, 2005 http://www.antera309.btinternet.co.uk/phots/diycarrepair/golfmk3/bmc/bmc6.jpgThe blue rubber bit that connects it to the MAF... Link to post Share on other sites
Recommended Posts