gaz.veedub 0 Posted December 21, 2010 Author Report Share Posted December 21, 2010 Nice work mate' date=' keep it up!Just wodnerin where you got the haldex kit? just cos i looked on there site and couldnt find anything to do with gearboxes? or am i just blind? haha cheers[/quote']You'll need to source the Haldex running gear from a breakers. You can use 4motion or audi TT and probably others aswell but I'm not too sure.as above Link to post Share on other sites
gaz.veedub 0 Posted December 21, 2010 Author Report Share Posted December 21, 2010 moved into rides and projects for you mate and keep the good work up see you at the pod for a wee race ..... lol cheerz bud,ill look forward to seeing ya there,race on (6) Link to post Share on other sites
gaz.veedub 0 Posted December 21, 2010 Author Report Share Posted December 21, 2010 That is looking so cool! (H)How difficult was it to install the halidex kit? I'm assuming it wasn't plug and play!big job mate but not much to do on the wiring side really,just wire the sqs haldex controller in and speedo for the gear box job done but fitting it was fun!alot of fabrication needed. Link to post Share on other sites
VR6Wherry 0 Posted December 21, 2010 Report Share Posted December 21, 2010 That is looking so cool! (H)How difficult was it to install the halidex kit? I'm assuming it wasn't plug and play!big job mate but not much to do on the wiring side really' date='just wire the sqs haldex controller in and speedo for the gear box job done but fitting it was fun!alot of fabrication needed.[/quote']Thought it would be! Did you have to relocate the fuel tank and then remove the spare wheel well? Link to post Share on other sites
gaz.veedub 0 Posted December 21, 2010 Author Report Share Posted December 21, 2010 That is looking so cool! (H)How difficult was it to install the halidex kit? I'm assuming it wasn't plug and play!big job mate but not much to do on the wiring side really' date='just wire the sqs haldex controller in and speedo for the gear box job done but fitting it was fun!alot of fabrication needed.[/quote']Thought it would be! Did you have to relocate the fuel tank and then remove the spare wheel well?ye had to remove the wheel well but made a custom tank to fit.wheel well gonetank from undersidetank from rear of car sits perfect Link to post Share on other sites
gaz.veedub 0 Posted December 27, 2010 Author Report Share Posted December 27, 2010 few more pics ive dug out from the buildcustom rear armsand new bit to go on asap Link to post Share on other sites
Sidhu88 1 Posted December 28, 2010 Report Share Posted December 28, 2010 awesome car mate, its somethin im really interested in doin too. any chance of gettin a proper build thread going? Link to post Share on other sites
legvw 0 Posted December 28, 2010 Report Share Posted December 28, 2010 Your custom rear arms are a clever idea, saves modifiying the rear chassis rails to accommodate the mk4 suspension set-up. What suspension (struts/springs) did you use on your car? Link to post Share on other sites
bungy 2 Posted December 28, 2010 Report Share Posted December 28, 2010 Did you buy or make your rear arms? Would be worth a thread on their own for those, very clever.... Link to post Share on other sites
gaz.veedub 0 Posted December 28, 2010 Author Report Share Posted December 28, 2010 awesome car mate' date=' its somethin im really interested in doin too. any chance of gettin a proper build thread going? [/quote']i never really did one mate it was just a few pics i did evey now and then when i had time sorry Link to post Share on other sites
gaz.veedub 0 Posted December 28, 2010 Author Report Share Posted December 28, 2010 Your custom rear arms are a clever idea' date=' saves modifiying the rear chassis rails to accommodate the mk4 suspension set-up. What suspension (struts/springs) did you use on your car?[/quote']thats the very reason we did it,it was my mate who did the arms for me,he jigged the mk3 rear beam chopped the hubs did the same with the mk4 rear arms and swop them over,was i real pain though.it was the longest part of the project and took about 3 months to do but saved so much fuss.it now on mk3 coilovers Link to post Share on other sites
gaz.veedub 0 Posted December 28, 2010 Author Report Share Posted December 28, 2010 some more pics dug out loland a temp exhaust till we got to powerflow! lol it did its job Link to post Share on other sites
gaz.veedub 0 Posted December 28, 2010 Author Report Share Posted December 28, 2010 also how the car looks from the outsideand in winter mode Link to post Share on other sites
bungy 2 Posted December 28, 2010 Report Share Posted December 28, 2010 Your custom rear arms are a clever idea' date=' saves modifiying the rear chassis rails to accommodate the mk4 suspension set-up. What suspension (struts/springs) did you use on your car?[/quote']thats the very reason we did it,it was my mate who did the arms for me,he jigged the mk3 rear beam chopped the hubs did the same with the mk4 rear arms and swop them over,was i real pain though.it was the longest part of the project and took about 3 months to do but saved so much fuss.it now on mk3 coiloversI quite fancy having a go at those just for the challenge. Link to post Share on other sites
J5KE F 0 Posted December 28, 2010 Report Share Posted December 28, 2010 mmmm.. I happen to have another spare haldex set up... any one fancy an attempt at another vento..?love this car mate and cant wait to see it / have a go against u at pod this coming season! Link to post Share on other sites
gaz.veedub 0 Posted December 28, 2010 Author Report Share Posted December 28, 2010 Your custom rear arms are a clever idea' date=' saves modifiying the rear chassis rails to accommodate the mk4 suspension set-up. What suspension (struts/springs) did you use on your car?[/quote']thats the very reason we did it,it was my mate who did the arms for me,he jigged the mk3 rear beam chopped the hubs did the same with the mk4 rear arms and swop them over,was i real pain though.it was the longest part of the project and took about 3 months to do but saved so much fuss.it now on mk3 coiloversI quite fancy having a go at those just for the challenge. your a mad man lol Link to post Share on other sites
gaz.veedub 0 Posted December 28, 2010 Author Report Share Posted December 28, 2010 mmmm.. I happen to have another spare haldex set up... any one fancy an attempt at another vento..?love this car mate and cant wait to see it / have a go against u at pod this coming season!ye im really looking forward to getting it down to pod,whens the first decent event down there? Link to post Share on other sites
gaz.veedub 0 Posted January 9, 2011 Author Report Share Posted January 9, 2011 vid for youCLICK PIC FOR VID Link to post Share on other sites
J5KE F 0 Posted January 9, 2011 Report Share Posted January 9, 2011 Late feb is probably one of the first meets.. Will be a few of us there..! Link to post Share on other sites
gaz.veedub 0 Posted January 9, 2011 Author Report Share Posted January 9, 2011 ok bud cheers ill try and keep an eye out on hear and see when your all making a trip down and see if i can make it Link to post Share on other sites
J5KE F 0 Posted January 9, 2011 Report Share Posted January 9, 2011 Sounds great on that vid btw Link to post Share on other sites
gaz.veedub 0 Posted January 9, 2011 Author Report Share Posted January 9, 2011 lol cheerz Link to post Share on other sites
gaz.veedub 0 Posted January 13, 2011 Author Report Share Posted January 13, 2011 small update,put my new inlet on today and sorted my splutter out so this weekend is charger fitting weekend 8o|pics for ya..... Link to post Share on other sites
legvw 0 Posted January 13, 2011 Report Share Posted January 13, 2011 Bring on the boost Link to post Share on other sites
bungy 2 Posted January 13, 2011 Report Share Posted January 13, 2011 How much psi are you going for? Link to post Share on other sites
Recommended Posts