acf8181 0 Posted July 17, 2004 Report Share Posted July 17, 2004 any thoughts....http://www.clubgti.com/forum/forum_posts.asp?TID=31274 (i can't be bothered to type it all out again!) Link to post Share on other sites
ingham 5 Posted July 17, 2004 Report Share Posted July 17, 2004 same way as mine ,will only fit in one way Link to post Share on other sites
acf8181 0 Posted July 18, 2004 Author Report Share Posted July 18, 2004 have you got a rear one as well? did you use the cup thingy off the original mount (has a bit of rubber in it originally) Link to post Share on other sites
acf8181 0 Posted July 18, 2004 Author Report Share Posted July 18, 2004 that link is updated with new pics by the way Link to post Share on other sites
speedo 0 Posted July 18, 2004 Report Share Posted July 18, 2004 i got a VF.... ( front) Link to post Share on other sites
andy 0 Posted July 18, 2004 Report Share Posted July 18, 2004 i fitted a vibra front mount yesterday, looks to be fitted the same as yours, except my engine was in place! can't say I've noticed any particular difference yet but time will tell... Link to post Share on other sites
VRmonster 1 Posted July 18, 2004 Report Share Posted July 18, 2004 if you were to look at a standard engine, they do sit slanted in the bay. i quizzed my logal stealer about it after putting in my front VT mount. so he showed me his vento vr and it was indeed wonkey donkey. lol. if yours is more than a little slant though, id get it checked out. cant wait to get my rear VTs in now. my engine is bouncing everywhere.oh, and the front looks fine on the pic in the other post.[ Edited Mon Jul 19 2004, 01:00AM ] Link to post Share on other sites
acf8181 0 Posted July 19, 2004 Author Report Share Posted July 19, 2004 i've been hunting through the gallery (i'm now a premium member at last) and they do appear to be slanted...it looks more obvious as i have no front end on.i'll take another pic tomoz tho. Link to post Share on other sites
andy 0 Posted July 20, 2004 Report Share Posted July 20, 2004 they are slanted, mine is anyway! I had to check a few others to make sure mine was ok.. it has gone back in exactly the same position with the Vibra mount as it was in before.. Link to post Share on other sites
Joe M 0 Posted July 20, 2004 Report Share Posted July 20, 2004 My rear mount was fitted without the cup. Link to post Share on other sites
acf8181 0 Posted July 20, 2004 Author Report Share Posted July 20, 2004 crap pic (phone), but what you think... Link to post Share on other sites
andy 0 Posted July 20, 2004 Report Share Posted July 20, 2004 to be totally honest it does look a little more slanted than ones I've seen, bit difficult to tell though, will try and post one of my engine later Link to post Share on other sites
acf8181 0 Posted July 20, 2004 Author Report Share Posted July 20, 2004 pics not at the best angle and it prob looks worse cause theres no front end on. Link to post Share on other sites
speedo 0 Posted July 21, 2004 Report Share Posted July 21, 2004 at stealth today, looked at vr6pete`s and mine, and the both sit slightly slanted. Link to post Share on other sites
Recommended Posts