JakeP
-
Content Count
151 -
Joined
-
Last visited
-
Days Won
3
Content Type
VR6OC News
Website Content
Profiles
Forums
Calendar
Gallery
Store
Collections
Community Map
Everything posted by JakeP
-
Got the exhaust manifold on and lifters in Now for the Schimmel 263 cams
-
Getting a little bit further with the build , got my head back from the machine shop with 1.8mm bigger inconel exhaust valves and supertech intake valves with new guides , stem seals , HD Valve springs and titanium retainers, also got the head skimmed , hot tanked and pressure tested. Put the mk4 MLS headgasket with the ARP head studs on and the SRI on
-
anyone :(?
-
Any help guys ?
-
Still looking
-
I've been trying for ages re adjusting it , I've turned over the engine a few times and put it back to tdc yet still can only get it like this
-
Right I need a bit of advice , I've timed the bottom half of the engine as the head is not ready , piston 1 is at tdc and the ground tooth opposite the main cap split , but I couldn't seem to get the intermediate shady sprocket bang on , it's about 1mm right of the guide mark behind the sprocket is that anything to worry about or do I have to re do it ?
-
Right so finally got my engine back so now for some building , seeing as all the bolts and bits for the engine are in bags and half of them aren't labelled this is going to be fun lol Got a few bits on like the oil filter housing , rear mount , crank sensor and started with the oil cooler but need to buy the UM external oil cooler pipe to in both OEM oil cooler and my Mocal external oil cooler
-
My engine builder has sourced once from a 2.0 GTi which is the same size apparently so should be able to get my block back on tuesday after so long!
-
Little update on the build... my engine builder was putting the wossner pistons in and hes cracked one of the rings.... how do I get hold of a set of wossner rings for the 82.5mm pistons? Getting rather annoyed as its been around a month and a half and hes only now started to build it and now hes cracked a ring :/, any advice on where to get a set?
-
Ky sent me the main caps and forgot to send cap #1 [emoji23]
-
Waiting on a main cap to arrive and the block can be put together then things can finally start to get moving !
-
Came today , really chuffed
-
I've got a spare one from my old block in my garage
-
I'll have the steering cowling
-
Bump , still looking
-
VR6 ODB2 ECU, Inlet, Throttle Body Engine Wiring Loom.
JakeP replied to apow's topic in Engine Parts
Is the loom from the fusebox to ecu etc or just the smaller one on the harness ? -
Because the engine loom I've got on the car at the moment is a crossover loom with coilpack but is obd1
-
Maybe they put a 1 instead of a 2 by accident
-
How will it fry my coilpack ?
-
95 is obd1 crossover isn't it?
-
Wanted vr6 obd2 loom from fusebox to ecu
-
Are they 17" wheels because Im looking to put the same brakes on mine and need to know if they will fit 17" oz superturismo wheels
-
What gearbox did you use with 576 bhp?
-
Just placed an order on a Garret GT3582r with a 0.82 ar and TiAL V-band housing from owen developments
