-
Content Count
134 -
Joined
-
Last visited
Content Type
VR6OC News
Website Content
Profiles
Forums
Calendar
Gallery
Store
Collections
Community Map
Everything posted by makster28
-
most probably the yellow sensor in the thermo housing if its not yellow its the middle one out of the 3 it controls your gauge amongst a few other things secondly change the rad sensor that could be giving you a false reading as well both are £11 from euro parts
-
lol ye lots never get the chance to hear the stage3 unless you test it i believe its on a seperate circuit controled by the brown thermo ac / temp sensor and the yellow sensor controles stage 1&2 combined with the fan module going off the cooling guide anyway,what do you thinks up with my ac then mate?probly sumert i mentimed no dout what do you rekon cheers
-
lol my air con switch lights up thats about it no fans kick in when pressed thas another problem i have,vag is now saying short on terminal 30 which i am pretty sure is one of the pins on the fan module numbered 30 the connector which covers this pin has burned and doesnt have a contact i noticed when replacing the old module and i think this is why i havent yet seen stage1 & stage 2 fans,but if if stage 3 aint cooling nothing down its a no winner,il try changing the rad sensor defernate cheers pal
-
on this note my mot is on friday and have been told the decat pipe i had fitted will fail the emmisions test is this true guys?
-
hi finally got the vt on the road and runs well car gets to 90 temp after like 15 minutes then fans kick in but noticed they are staying on for like half hour after kicking in during the drive and the temp still stays at 90,is this normal? i ended up just disconecting them.help apreciated
-
i have just picked up 3 bottles from vw can anyone point me in the right direction in how to do the best flush along with apllying the g12 and bleeding the system properly,im pretty sure i have a huge airlock which is effecting the heaters as the matrix isnt leaking and the 2 hoses going in there are hot and flowing,help appreciated guys
-
installed new coolant today and took advice from here to leave the cap off with heaters on full bore in the expansion tackle bubles were riising all the time all of my hoses get hot even the matrix ones my temp reads 90 and fans kick in regular but i still have no heat coming in the car also jsut put a new thermostat and new housing in,can anyone shed any light on this,many thanks --------------------------------------------------------------------------------
-
installed new coolant today and took advice from here to leave the cap off with heaters on full bore in the expansion tackle bubles were riising all the time all of my hoses get hot even the matrix ones my temp reads 90 and fans kick in regular but i still have no heat coming in the car also jsut put a new thermostat and new housing in,can anyone shed any light on this,many thanks --------------------------------------------------------------------------------
-
installed new coolant today and took advice from here to leave the cap off with heaters on full bore in the expansion tackle bubles were riising all the time all of my hoses get hot even the matrix ones my temp reads 90 and fans kick in regular but i still have no heat coming in the car also jsut put a new thermostat and new housing in,can anyone shed any light on this,many thanks
-
heater only working on number 4?
makster28 replied to makster28's topic in Engine Maintenance and Problems
sorted the fan speeds but have no heat coming in the car and when on full power i have hardly any air coming through the dash vents,help aprciated -
i have heard my aux water pump but its not always on,should it be on everytime the engine is turned off mate?
-
HEATER NOT VERY HOT???
makster28 replied to Mk1 Vr6 james's topic in Engine Maintenance and Problems
i have this problem as well next to tackle and to be honiest i havent a clue were to start,i have just got 4.5 litres of g12 to put in as i have just had water in the car whilst fitting new thermo housing and didnt want to loose coolant,would the lack of heat in the car have something to do with the coolant,any tips on applying it would be great thanks -
finaly got my fans working,it turned out to be 2 of the wires on the brown sensor clip were touching vag spotted the problem also changed the sensor,the fans kick in and turn on & off fine now but i am pretty certain its the stage 3 kicking in,and the temp is reading half way 90, does anyone know of some more checks i can do i changed the fan module and i am asuming it works or is stage 3 nothing to do with it?
-
went into europarts today for the brown sensor which belongs in the thermo housing and the guy said its nothing to do with your aircon its called a thermo cooling senso,is he correct or is it for the air con like everyone says on here?
-
finaly got my fans working,it turned out to be 2 of the wires on the brown sensor clip were touching vag spotted the problem also changed the sensor,the fans kick in and turn on & off fine now but i am pretty certain its the stage 3 kicking in,and the temp is reading half way 90, does anyone know of some more checks i can do many thanks,
-
top shout nce one
-
cool pic 16 i need mine has melted and had a botch temp repair on it when i bought the car also the big air intake pipe less the extras number 9 i think mines cracked were the breather pipe joins,do you know were best place to get these are and a price roughly cheers
-
hi does anyone know what the little rubber pipes called that conects to the air mass meter and then to the air intake pipe mines clean in half and cant see a part number,cheers
-
lambda sensor help needed vag says short to ground on lambda fault 2 low voltage?
-
cheers mate thats just saved me 2 days messin lol