Jump to content

leespiro

Members
 View Profile  See their activity

  • Content Count

    407

  • Joined

  • Last visited

 Content Type 

Everything posted by leespiro

  1. leespiro
    hi ive got my odb2 loom now in my golf my fuel pump is not working ive got a spark and its starts with easy start i ead that later vrs dont have the fuel pump relays can any of you guys help
  2. leespiro
    also my golf vr6 was the late 1995 which has lots of odb2 parts already
  3. leespiro
    hi all ive converedt my golf vr6 to obd2 and ive been told the lamba sensors are different from obd1 checked euro car parts they say there are the same what number on the lamba do i need to check for thanks lee
  4. leespiro
    ive just finished mine chains today just waiting for my gearbox to come back just fitted lsd also just converted mine to obd2 hopefully when its all back together hope it starts
  5. leespiro
    ok where this box located and does the transponer go into that separate box
  6. leespiro
    sorted got the odb2 loom in bit of a nightmare but it done also is the immobliser in the ecu or is there a seperate box where does the wire goto for the transponder
  7. leespiro
    ive done that cant get it low enough to see which ones are the engine loom connect to the box also u know how to get the brake pedal off the brake servo
  8. leespiro
    also can get the fuse box low enough to see what plugs take out the engkine loom
  9. leespiro
    hi how do you remove the brake servo from the pedal im stuck there
  10. leespiro
    ok ive got the key transponder will the ecu still need immobilizer bypass
  11. leespiro
    ok ive got the key transponder will the ecu still need immobilizer bypass
  12. leespiro
    not sure if its worth changing over to obd2 wont it just be the same if you just map the obd1 ecu
  13. leespiro
    how much does it cost to get the immobilizer off?
  14. leespiro
    also my car has remote start
  15. leespiro
    on my obd1 i have a clifford concept 650mk2 and the obd2 not sure wat it is but there not factory
  16. leespiro
    thanks gonna give it a go
  17. leespiro
    does the dash have to come out
  18. leespiro
    hi all is there a guide on here for convert my golf mk3 vr6 2.8 from obd1 to obd2 i have all the bit and bots cheers
  19. leespiro
    howz the rolling road day going at stealth and snap shots
  20. leespiro
    hi can any one show and watch the rolling road runs
  21. leespiro
    hi all does anyone have a 3.6 fd for sale im fitting a lsd soon so it would be a good idea to put the final drive in at the same time
  22. leespiro
    hi thinking of buying a mk4 r32 just wondering any of you guys own one and what are you thoughts thanks
  23. leespiro
    also does the obd2 setup produce the torque lower down the rev range has ive been looking threw the rolling roads posts and see alot of obd2 vr6s get the max torque around 4-5k
  24. leespiro
    nice one do u have a link to it just checked ebay couldnt find them
  25. leespiro
    are these the single chain and guide numbers * 021 109 503 D - upper timing chain * 071 109 513 - upper timing chain guide rail * 021 109 509 E - upper timing chain tensioner rail * 021 109 465 B - lower timing chain * 021 109 469 - lower timing chain guide rail * 021 109 467 - lower timing chain tensioner rail * 068 198 171 - rear main oil seal cheers
×
×
  • Create New...