thelynx 0 Posted July 8, 2006 Report Share Posted July 8, 2006 Hey Im new to this site and am currently looking around for a vr6... When I get the car new wheels and suspension will be purchased, coilovers and a set of 7.5x16 borbet a's... Question is how low can you go with this size before you run in to scrubbing or any other problem? Gonna get the car looking mean as Hope you guys can helpCHeers :-d Link to post Share on other sites
Earwig 89 Posted July 8, 2006 Report Share Posted July 8, 2006 You might get away with it on coilovers. Best thing to do is get the inner lips of the arches rolled just to be sure.You should get a 60mm drop before running into to many problems.Others that have a simalar set up should be able to give you a bit more info :-)Mark. Link to post Share on other sites
richievr 1 Posted July 8, 2006 Report Share Posted July 8, 2006 mine is on 8x16's all round..with the rear arches rolled on nothing done on the fronts at all - i have no rubbing problems with my coilies wound almost right down....you can go pretty damn low with 16's , just be careful of your sump on the ground !!! Link to post Share on other sites
thelynx 0 Posted July 8, 2006 Author Report Share Posted July 8, 2006 Can you get sump guards ? To give an extra bit of protection.. Link to post Share on other sites
VR6Pete 1,455 Posted July 8, 2006 Report Share Posted July 8, 2006 Look at my sig im running 16's... Link to post Share on other sites
Petesvw 0 Posted July 8, 2006 Report Share Posted July 8, 2006 Sump gaurds are available, there was talk of a group buy a few months since, but to no avail! Link to post Share on other sites
craggsy 91 Posted July 8, 2006 Report Share Posted July 8, 2006 I'm on 9*16s and get slight rubbage when there's a slight undulation in the road, also when people are in back. HAd my arches rolled and need to get them flared/pulled. My pics are somewhere on forum Link to post Share on other sites
Recommended Posts