dub_weiser 0 Posted May 25, 2004 Report Share Posted May 25, 2004 Just a quick question, can these wheels be fitted to my VR? Not too clued uo on all this.Cheers Link to post Share on other sites
kilokilla 0 Posted May 25, 2004 Report Share Posted May 25, 2004 ive had et35 and et37 but the et35 needed spacers so i dont think they will but im not positive on that . Link to post Share on other sites
acf8181 0 Posted May 25, 2004 Report Share Posted May 25, 2004 this should help (tells centre bores and PCD's as well)...http://www.tyresave.co.uk/fitment.html#VOLK Link to post Share on other sites
kilokilla 0 Posted May 26, 2004 Report Share Posted May 26, 2004 thats a really useful chart could have done with that ages ago nice 1 acf. Link to post Share on other sites
Phil 0 Posted May 27, 2004 Report Share Posted May 27, 2004 I ran ET30 for a whil, but what width are you running? Link to post Share on other sites
dub_weiser 0 Posted May 27, 2004 Author Report Share Posted May 27, 2004 7x16 size. How would they sit in the arches? Would I need spacers? Link to post Share on other sites
VRmonster 1 Posted May 27, 2004 Report Share Posted May 27, 2004 i thaught the lower you go down the scale ie et 31 being lower than et 35, your wheel gets further away from the hub, thus not needing spacers, but making the wheel rub on the arch lip? so i dont think you will need spacers, but be watchfull of how close your wheel is to the arch. Link to post Share on other sites
Recommended Posts