binliner 0 Posted January 1, 2006 Report Share Posted January 1, 2006 nice to meet you apd and yes my (tatty) vr is my pride and joy your figures are even dafter than mine :@ i got very low (ie bullshit )flywheel figures of 196 bhp and 192 lb ft they came up with 10% trany loss which is poo imo :? :? last year at stealth i got 198 bhp and 187 lb ft fly iv since had 268 cqams a 6/2/1 manifold and a remap wheel figures r pretty acurate from roller to roller arnt they??i got 144 lb ft and 153 bhp at stealth today i got 175 lb ft and 178 bhp thats 30 lb ft and 25 whp gain !amazed !amazed if i use stealths tranny loss mine comes out at 230 bhp and 226 lb ft without a schrick it used to make 144 lb ft at the wheels from 4500-5500 then it tailed off now it makes 145 lb ft at 2500 and keeps goin upto 175 and still makes over 150 at 6k revs dropping to 140 at 6500 all at the wheels conclusion im reckonin iv got 210-220 bhp with similar torque and roll on santa pod ps what did ya reckon to the noise the rollers didnt flatter it After reading your whole post, twice, I still can't work out what your actual rr figures were? Link to post Share on other sites
Eat this 2 Posted January 1, 2006 Report Share Posted January 1, 2006 my grammer is useless but the info IS there today i got 175 lb ft and 178 bhp thats atw btw Link to post Share on other sites
binliner 0 Posted January 1, 2006 Report Share Posted January 1, 2006 and at the fly? Link to post Share on other sites
VR6Pete 1,455 Posted January 1, 2006 Report Share Posted January 1, 2006 I assume that ATW means at the weel? Link to post Share on other sites
VR6Pete 1,455 Posted January 1, 2006 Report Share Posted January 1, 2006 I assume that ATW means at the weel? Link to post Share on other sites
Eat this 2 Posted January 2, 2006 Report Share Posted January 2, 2006 I assume that ATW means at the weel?yes pete i cant trust the corrected figures what did u put out at the wheels?? Link to post Share on other sites
apd 0 Posted January 3, 2006 Report Share Posted January 3, 2006 been on the awesome site to look at the results.still confused about fly/torque figures,even on other motors?FAO EATTHIS? Link to post Share on other sites
Eat this 2 Posted January 5, 2006 Report Share Posted January 5, 2006 il have a look but the transmission loss they said mine got is rubish waaaaaaaaaaaaay to low Link to post Share on other sites
Eat this 2 Posted January 5, 2006 Report Share Posted January 5, 2006 http://www.awesome-gti.co.uk/rollingroad/rr.xmas3_30.12.05.html Link to post Share on other sites
apd 0 Posted January 5, 2006 Report Share Posted January 5, 2006 your max power/torque figures are at the wheels,so multiply by 17% stealth tranny loses and they are more accurate?according to awesome anyway! Link to post Share on other sites
Recommended Posts