science 7 Posted January 31, 2015 Report Share Posted January 31, 2015 Cool, what code is it throwing you? Link to post Share on other sites
Mk3highline 287 Posted February 1, 2015 Author Report Share Posted February 1, 2015 Can't remember the code but it said short to ground/live and intermittent when I pulled plugged and back onI'm going to try the old ecu with new cam sensor to see how it runs I don't think it will be any better but no harm in trying I've been up north visiting round trip of just under 300 miles on 3/4 tank 1/4 was local half was mortorway Two more falken 914 tyres and 1.5 neg camber Link to post Share on other sites
Mk3highline 287 Posted February 2, 2015 Author Report Share Posted February 2, 2015 Put the old ecu back on and it don't feel as smooth as the sharan oneWhen I get chance will go over to stealth to plug in to vagcomm to see if it's throwing a codeThe ignition map on the sharan must be a lot smoother compared to the golf it's quite nice to be honest not so snappy but progressive Will keep the old ecu on a week see how it goes Link to post Share on other sites
Mk3highline 287 Posted February 5, 2015 Author Report Share Posted February 5, 2015 Update on ecu The old golf ecu, car ran like before and it was sh1tI could hear the detonation from 2.5k upwards Plugged in the sharan ecu and it runs spot on like oeNothing erraticJust waiting to see if Vince can code out the secondry air injection and the EGR The cars exhaust note has now got the burble similar to a r32 on full chat DanChave, c00k and Bealieboy 3 Link to post Share on other sites
Mk3highline 287 Posted March 12, 2015 Author Report Share Posted March 12, 2015 (edited) Can't do anything els for a whileI like glitter nail polish lol Edited March 12, 2015 by Mk3highline Link to post Share on other sites
bennyk 1,238 Posted March 12, 2015 Report Share Posted March 12, 2015 Did you matt black the badge then get loads of stone chips on it?! Bealieboy 1 Link to post Share on other sites
Mk3highline 287 Posted March 12, 2015 Author Report Share Posted March 12, 2015 Lol that's what happen before Then whilst I had the hammerite out it got coated then I found some glitter nail polish The car does feel so much quicker now bennyk 1 Link to post Share on other sites
Bealieboy 1,625 Posted March 12, 2015 Report Share Posted March 12, 2015 Lol that's what happen before Then whilst I had the hammerite out it got coated then I found some glitter nail polish The car does feel so much quicker nowthats a 5hp upgrade right there! Good work. Mk3highline and daveyboy 2 Link to post Share on other sites
Mk3highline 287 Posted March 15, 2015 Author Report Share Posted March 15, 2015 Didn't realise till now it can do this in 4th the pic got taken bit early too daveyboy, brummy_h and D11PS 3 Link to post Share on other sites
Mk3highline 287 Posted March 17, 2015 Author Report Share Posted March 17, 2015 What I just got sent lol D11PS, Bealieboy and daveyboy 3 Link to post Share on other sites
Mk3highline 287 Posted April 2, 2015 Author Report Share Posted April 2, 2015 Big thanks to bennyk for the wiperstalks and the throttle bodyMade a nice little difference in the drivability lot smoother Bealieboy and bennyk 2 Link to post Share on other sites
bennyk 1,238 Posted April 2, 2015 Report Share Posted April 2, 2015 Is that because you can see where your going when it rains now? Mk3highline 1 Link to post Share on other sites
Mk3highline 287 Posted April 2, 2015 Author Report Share Posted April 2, 2015 Yeah lol normally I'd have to keep it held up to work constantly Link to post Share on other sites
Mk3highline 287 Posted April 27, 2015 Author Report Share Posted April 27, 2015 Mk4 rear calipers black diamond brake lines and fresh fluid Booked in at http://www.rsdlimited.com/index.htmlWednesday just waiting for the rear brembo discs and pads nowAll going well tomorrow I will be doing the wish bones with r32 bushing and new ball joints Bealieboy 1 Link to post Share on other sites
Mk3highline 287 Posted April 28, 2015 Author Report Share Posted April 28, 2015 I can see at night now D11PS 1 Link to post Share on other sites
pappers 50 Posted May 2, 2015 Report Share Posted May 2, 2015 What have you done with your air intake? I can't see the stock one in the pics. Link to post Share on other sites
Mk3highline 287 Posted May 2, 2015 Author Report Share Posted May 2, 2015 I have had to put it just above the gear box and below the abs unit It draws in cooler air that way until I move the battery to the boot will get a picture up at some point I'm working today and tomorrow pappers 1 Link to post Share on other sites
pappers 50 Posted May 2, 2015 Report Share Posted May 2, 2015 I need to look into it. Is that the usual way moving the battery? Are you using the stock intake? Link to post Share on other sites
science 7 Posted May 2, 2015 Report Share Posted May 2, 2015 I can see at night nowHIDs? Link to post Share on other sites
Mk3highline 287 Posted May 2, 2015 Author Report Share Posted May 2, 2015 Yeah eBay specials 4300k sun wolfs £15!!Surprisingly no complaints for glare and they light up the road nice Bealieboy and science 2 Link to post Share on other sites
Mk3highline 287 Posted May 6, 2015 Author Report Share Posted May 6, 2015 Here is the mess of my engine bayI'm still a little undecided which way to go forward but you can see the filter just about and cold air feed taken from front under fog/indicator It's a mess I'm not proud of but one day in the summer it might get sorted once I've moved the battery and power steering resi Link to post Share on other sites
Mk3highline 287 Posted May 12, 2015 Author Report Share Posted May 12, 2015 http://www.torotrak.com/products-partners/products/v-charge/Fingers crossed Link to post Share on other sites
Mk3highline 287 Posted May 14, 2015 Author Report Share Posted May 14, 2015 Shift light to control the inlet manifold Link to post Share on other sites
Mk3highline 287 Posted May 14, 2015 Author Report Share Posted May 14, 2015 It's not staying there as rain called off playIt works and stays on a fraction of a second after revs drop below set point which is ideal https://vimeo.com/127820711 Link to post Share on other sites
Mk3highline 287 Posted May 30, 2015 Author Report Share Posted May 30, 2015 Had a wash,need a good rub down and polish Got this to use as a jig of a sort to get a 24v manifold made, hopefully I get it right as its a right fek about changing them over with the 24v as front end got to come off to get the inlet off It's a supersprint copy but I think that the wall sections are a bit thin too the collectors are nastyThis is something I need to get daveyboy and D11PS 2 Link to post Share on other sites
Recommended Posts