Gilly17 51 Posted January 17, 2014 Report Share Posted January 17, 2014 Hi everyoneI am after some help. When I fire up my vr it makes a horrible crouching noise. I have took the starter motor off and test it with some jump leads and a bit of wire. It goes in and out like it should do. I have also fitted a new ignition switch. What else could it be? Sent from my iPhone using Tapatalk Link to post Share on other sites
mattvr6 133 Posted January 18, 2014 Report Share Posted January 18, 2014 Is the starter motor running on? Sent from my iPhone using Tapatalk Link to post Share on other sites
Daverse 175 Posted January 18, 2014 Report Share Posted January 18, 2014 Can you get a vid off it? Sent from my GT-P5210 using Tapatalk Link to post Share on other sites
Gilly17 51 Posted January 18, 2014 Author Report Share Posted January 18, 2014 Yes. It starts ok then it runs on for a sec. Can't get a video up yet cos I've got the starter motor off at the moment going to strip it down and grease the cogs inside.Sent from my iPhone using Tapatalk Link to post Share on other sites
Gilly17 51 Posted June 27, 2014 Author Report Share Posted June 27, 2014 Finally got it sorted!!!!!! The little copper bush in the bell housing was missing. Bought a new one of eBay for a few squid, popped it in and it starts like a dreamSent from my iPhone using Tapatalk MJ Vr6 1 Link to post Share on other sites
Recommended Posts