Stoo the worm 0 Posted March 6, 2009 Report Share Posted March 6, 2009 Basically, i want to change my standard vr steering wheel for a mk5 golf wheel...is it possible, as i know u can retro fit a mk4 one with some small modifications, and if so, how do u go about it.Thanks in advanceStoo Link to post Share on other sites
9108matthew 0 Posted April 4, 2009 Report Share Posted April 4, 2009 hi there mate i have the same problems how do i fit a mk4 wheel in the mk3 you have any ideas yet Link to post Share on other sites
supadupagt4 0 Posted June 1, 2009 Report Share Posted June 1, 2009 the mk4 steering wheel fits like a glove if u do it right.On the back of the wheel is a big copper spring called a 'clock' spring.This, on a mk3, is held in place by 3 screws. on the mk4 its only 2, both in different configurations.drill new holes and swap over. all done.tony. Link to post Share on other sites
Antihero1981 8 Posted June 4, 2009 Report Share Posted June 4, 2009 i presume you dont run airbags! Link to post Share on other sites
supadupagt4 0 Posted June 8, 2009 Report Share Posted June 8, 2009 the airbags work the same. Just need to change the connector. Link to post Share on other sites
Rikki 2 Posted June 8, 2009 Report Share Posted June 8, 2009 http://www.cabrio-info.com/wiki/How_to_Modify_a_Mk4_Steering_Wheel_to_Fit_a_Mk3 Link to post Share on other sites
Recommended Posts