need to locate inlet air temp sensor or engine coolant temp sensor

[vr6ixy 0]

Hi guys can anyone tell me where i can locate the above on a 1993 obd1 engine vr6, got a lil mod to fit but need to know where these sensors are coz if there is no iat sensor then it needs to be fitted to the engine coolant temp sensor.Pics would be good if anyone got some, thanks.

[ingham 5]

is it an ebay mod

ie add a part to temp sensor to up the fuel?

[vr6ixy 0]

Hi its a mod from celoxperformance either goes from ait sensor or from coolant sensor if ait not present, but it says if ait has 4 wires use non powered 2 wires but ait on golf only has 2 wires !!!!

[craggsy 91]

The way it reads to me is that it tricks car into thinking its cold......which to me would make it overfuel

[vr6ixy 0]

The guys from the place i purchased it from say use the 2 wires on the ait sensor, so do i go for it or not, how do you mean by overfuel craggsy !!!

[vr6ixy 0]

So where is the IAT located am i right in thinkin its on the right hand side of front manifold as you look at it ? The one with 2 wires and a pain in the a$$ clip on it

[craggsy 91]

When i say over fuel i mean it just makes it think its cold so its like its got choke on permantly

[vr6ixy 0]

ok will see what happens when i get it fitted, if it revs higher then it sounds like thats what it is doin in which case i may remove it, so am i right in sayin wher the ITA is located so i can get the module fitted and see what it does.

[craggsy 91]

im not too sure where that would be

[FishWick 21]

Connect it to the AIT. It will over fuel less than it would if connected to the water temp sender but neither is a particularly good idea imo.

[richievr 1]

yep... end of inlet manifold

but it sounds like a waste of time to me.. ??

[xyber 1]

dont do it, if they where that good all the big name tuners would sell them and not just random internet companies and ebay

[vr6ixy 0]

will try it if no good or strange things happen will remove and throw over left shoulder and never look back lol