SHARKY 0 Posted November 13, 2008 Report Share Posted November 13, 2008 Hi guys..I'm suffering with mist on the inside of the car and condensation inside and I'm looking for a picture of the bulkhead with the dash removed - wondering if anyone has one??I'm trying to find any possible places that moisture and water could get through.Don't think its the screen as I had it removed for a full respray and the problem was there before hand. The mist seems to start to appear from behind the instrument cluster at the bottom of the screen, thinking maybe a grommet or something behind there. The drivers side carpet was damp but I think i solved that so it could just be taking time to dry. I'm thinking its damp behind the dash on the drivers side.I'm going round all the usual suspects and finding nothing wrong, I'm needing to do some research behind the dash - without taking mine out at first.So if anyone has a picture of the bulkhead with the dash removed or from the engine bay side I'd be most grateful... Or for that matter any ideas/ thoeries...Cheers guys... Link to post Share on other sites
VR6Pete 1,455 Posted November 13, 2008 Report Share Posted November 13, 2008 Any use to you? Link to post Share on other sites
SHARKY 0 Posted November 13, 2008 Author Report Share Posted November 13, 2008 Cheers for those - thye're helping a little..Could do with ones stripped of everything though - if anyones got some...??Maybe a bare shell?Cheers guys... Link to post Share on other sites
Lizard Racing 0 Posted November 13, 2008 Report Share Posted November 13, 2008 Have you checked the grommet inside the tray on the drivers side. The bonnet release cable goes through it. It was leaking on mine, but to find it I removed the vent and looked for the trickle with a torch while I hosed her down! Link to post Share on other sites
boundsw 0 Posted November 20, 2008 Report Share Posted November 20, 2008 I always used to get condensation inside my car... had to do the heater matrix... a pain, but worth it, only takes a few hours, a philips driver, and a small socket ! Link to post Share on other sites
Recommended Posts