Jump to content

Traction on a vrT


Recommended Posts

how do you know what torque your going to get??

350 bhp is around 12-15psi depending on spec..

what you got planned??

i run a open dif fon mine, no probs at all, you may want to limit boost in first and second to stop things exploding

Link to post
Share on other sites

Thanks for the replies chaps :)

This is the kit that wil be installed.

Garrett GT32 Turbo (internal or external design) complete with oil fittings and downpipe flange

SP Turbo 'shorty' ignition wires

SP Turbo Short Runner intake complete with billet fuel rail and Fuel Pressure Reg adaptor

SP Turbo 8.5:1 spacer head gasket

SPA Turbo Exhaust manifold

Bosch 440cc (green) injectors

Genuine VW Intake and exhaust manifold gaskets inc. new studs and nuts for exhaust

Forge motorsport Re Circ Dump valve

Head bolt kit

Oil feed & return lines complete with fittings

Euorspec 3- 5bar adjustable fuel pressure regulator

Also

2 x 280mm Spal Electric slimline Fans and ARP head stud kit.

The conversion people roughly qouted me the figures for torque.

Link to post
Share on other sites
  • 2 weeks later...

you can get cheap OBX diffs from the states' date=' they just need the spring washers replacing and then the bolts all torqued up in sequence and they are spot on for about £250

[/quote']

yeah u got a link fella as i could do with one of these

search OBX diff on ebay and it come up strate away

Link to post
Share on other sites
×
×
  • Create New...