Jump to content

Recommended Posts

Does someone know the answer to .....if I put a personal regastration on my car that is 3 letters 3 numbers, can I have a black plate with silver letters as the plate is pre 73 or is this not allowed as the car has to be pre 73 and my car is newer.

Does the pre 73 go with the car or plate, I quite like black plate with silver letters on Black cars.

Link to post
Share on other sites

Number plates again!! right guys this is the definitive guide!

Any car registered after 1973 has to wear a reflective white plate on the front and a yellow on the rear, pre 73 black and silver were standard, later cars can wear pre 73 reg but the plate has to conform regulations regarding to the age of the car!!!

Letters and Numbers MUST be of the Charles Wright type face, plates/cars made before 2001 can display the earlier larger type letters and numbers 79mm height and 57mm width (the later plates on **51 *** etc cars have the same font but it was reduced in size to 50mm to allow room for the extra digits on the plates)

Pre 2001 the spaces between characters must be 11mm and space between groups in 33mm

Post 2001 spaces between characters must be 10mm space between groups is still 33mm

ALL plates made after 2001 MUST have BS AU 145d the name trade mark or other means of identifying the supplier AND the name and postcode of the supplying outlet where the plate was made/bought

BUT if you have the old style type pressed metal plates (white and yellow) made at a classic car show or off T`internet ;) they can have the old font, and they dont need all the BS marks or makers marks and postcodes etc, so the onus would be on the police to PROVE the plate was made yesterday and NOT 20 years ago (or pre 2001 anyway)

GERMAN PLATES ARE ILLEGAL IN THIS COUNTRY, PERIOD!

Link to post
Share on other sites
  • 1 year later...

One further question ... I am smoothing my bumpers and i want a sticky vynil sticker instead of ridgid plate on one corner of the bumper if it conforms to the reg plate size and type face with the spacing etc can i have it ??? Anyone know where i can get one made ???? or could i have it painted onto the bumper instead ?????

Link to post
Share on other sites
  • 2 months later...
  • 7 months later...
  • 4 weeks later...
×
×
  • Create New...