DommyVR6 0 Posted March 5, 2007 Report Share Posted March 5, 2007 Well a few months ago I cracked my sump. When it came to refitting I did not replace the gasket, and it has now started to leak from the join. So I guess I need a new gasket, which is a dealer only part. But do I need new bolts as well, and if so what are they Torqued to?This could also turn out to be a simple guide to add to the Knowledge vault. Link to post Share on other sites
purple highline monster 0 Posted March 5, 2007 Report Share Posted March 5, 2007 That was a pointless short cut then? part number N 90423402 for bolts and 021103609B sump gasket not sure if you really need new bolts? the quantity of bolts (its about 26) dont know torque setting though Link to post Share on other sites
cadguy77 0 Posted March 5, 2007 Report Share Posted March 5, 2007 i replaced my gasket with one from GSF. used same bolts (and theres lots of them). No leaks so far (fingers crossed) Link to post Share on other sites
purple highline monster 0 Posted March 5, 2007 Report Share Posted March 5, 2007 the gaskets are rubber ones now too Link to post Share on other sites
lee060 3 Posted March 5, 2007 Report Share Posted March 5, 2007 the one i did i just replaced the gasket , used the same bolts and nipped them up (no tourqes) . sumps not leaked since Link to post Share on other sites
dazzatop 0 Posted March 11, 2007 Report Share Posted March 11, 2007 me too i used same bolts, tourqed them had a small leak nipped them up tight no more leaks. gasket was £20ish Link to post Share on other sites
Recommended Posts