VR6Rob 0 Posted July 10, 2004 Report Share Posted July 10, 2004 I got my 260/264 cams, schrick manifold, chip and RR done at stealth and got 203Bhp 202lbft up from 191Bhp 185lbft http://img78.photobucket.com/albums/v321/VR6rob/As every body says it has completely transformed the way the engine pulls. Link to post Share on other sites
Eat this 2 Posted July 10, 2004 Report Share Posted July 10, 2004 is urs an obd1 or 0bd2 it doesnt seem a vast increase for the mods? Link to post Share on other sites
VR6Steve 0 Posted July 10, 2004 Report Share Posted July 10, 2004 I would say thats about right fo a performance gain.Similar to what I got with Kent 264 Cams Link to post Share on other sites
VR6Rob 0 Posted July 10, 2004 Author Report Share Posted July 10, 2004 Obd2 I was hoping for a bit more as some have got more with just the manifold. but loving the pull from 3000rpm. Link to post Share on other sites
VR6Pete 1,455 Posted July 10, 2004 Report Share Posted July 10, 2004 it's not what you read on paper, people read into that too much.... it's how it drives on the road, and would you turn your nose up at over 200lb ft of torque? noope Link to post Share on other sites
VR6Steve 0 Posted July 10, 2004 Report Share Posted July 10, 2004 Cams & chip in mine produced 197bhp as a comparison. Link to post Share on other sites
Eat this 2 Posted July 10, 2004 Report Share Posted July 10, 2004 it's not what you read on paper' date=' people read into that too much.... it's how it drives on the road, and would you turn your nose up at over 200lb ft of torque? noope [/quote']bob on m8 Link to post Share on other sites
rudedubber 0 Posted July 14, 2004 Report Share Posted July 14, 2004 i know what you guys are saying about forget the paper readings and you can feel the difference but for the outlay and mods it also seems a little low to me, but i wouldnt say no to it Link to post Share on other sites
binliner 0 Posted July 14, 2004 Report Share Posted July 14, 2004 remember also rolling road figures are also influenced by the temperature and air conditions on the day Link to post Share on other sites
mark@vagworx 0 Posted July 15, 2004 Report Share Posted July 15, 2004 True Justin. As it been said many times before, every RR is different and as Justin said, ambient air temps play a huge part.Mine got a re-map, full supersprint exhaust incl decat and filter and produced 202bhp and 193lb/ft on AmD's rollers. But figures are just figures at the end of the day imo. Link to post Share on other sites
binliner 0 Posted July 15, 2004 Report Share Posted July 15, 2004 to illustrate the point on Stealths rollers I've had 184bhp just after arriving with a hot engine... 15 mins later after using their massive fan to cool it down I got 192bhp! Link to post Share on other sites
mark@vagworx 0 Posted July 15, 2004 Report Share Posted July 15, 2004 Case closed Link to post Share on other sites
dubloke 4 Posted July 16, 2004 Report Share Posted July 16, 2004 the only way for a true "on paper" comparison is to run all the cars, modded or otherwise, on the same rr on the same day! something like...ooh...errrr...this october at stealth? lol must say i am quite happy with my cars road manners(or lack of them depending on what car you drive!) and its printed performance figures, considering the mods anyhow! Link to post Share on other sites
Mangold 0 Posted July 16, 2004 Report Share Posted July 16, 2004 As another comparison, mine got 208bhp and 210flbs at AMD after a remap on an obd2 engine with a ram air, supersprint cat back and schrick manifold. Link to post Share on other sites
Eat this 2 Posted July 16, 2004 Report Share Posted July 16, 2004 210 ftlb is well good more torque than power is rare isnt it? Link to post Share on other sites
VR6Pete 1,455 Posted July 16, 2004 Report Share Posted July 16, 2004 it will be interesting what you get at stealth mangold in comparason with mine n dub blokes Link to post Share on other sites
Recommended Posts