Jump to content

wisby

Members
 View Profile  See their activity

  • Content Count

    15

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by wisby

  1. wisby

    wisby

    wisby posted a Community Map marker in Members

  2. wisby
    Getting a bit cheesed with mine . All the seals are holding up. It's now weeping where the two housings go together. What map and fuel pump are you using with these things My car was at 8v gti so I'm not sure if that pump is up to it really so I'm going to replace it with the 16v kr one.
  3. wisby
    That's what mine was like
  4. wisby
    As far as I know there the original ones the inner diameter is the same. It's just the od are different where they sit in the collars on the housing. I used the 3 bearings that were in the rebuild on hear .
  5. wisby
    They weren't then we took it apart.
  6. wisby
    Best bit I think they were only £7 each.
  7. wisby
    If you need those seal sizes let me know. Rob
  8. wisby
  9. wisby
    There for the tool to unwind it. Like a pin spanner. Then just undo it as it's threaded and screws into the casing. If that makes sense.
  10. wisby
    They are high speed high temp double lipped seals. I had them matched to the old ones. The end with the four holes had to be machined out very slightly and went slightly bigger than the original on the other end and done away with the collar that the old one sat and just pressed the seal in on its own.
  11. wisby
    They are high speed high temp double lipped seals. I had them matched to the old ones. The end with the four holes had to be machined out very slightly and went slightly bigger than the original on the other end and done away with the collar that the old one sat and just pressed the seal in on its own.
  12. wisby
  13. wisby
    I'm making progress I have now got new seals different from the old ones but newer technology. Rob
  14. wisby
    I do have my old ones but nobody can match them. I do have a place that might be able to make some but not a definite. Can you suggest somewhere as an alternative. Rob
  15. wisby
    Hi Where did you source the seals from i have everything apart from them (i think) i have been using mine as an expensive paper weight . I have had it since September and it has been in bits since i brought it as as soon as i put it on it was leaking oil. and now i sick of looking at it . Could i use a different type that will do the same job . as i am guessing these things are 20+ years old an tech must have moved on since in the seal ind. Any help appreciated. Rob
  16. wisby
    Hi guys I'm a a bit of a loss right now i brought a z1 charger . It turns out to be a bit of a dog and at the moment I regretting buying it . It's leaking oil and just crap I have all the bearings but it's the main seals . Has anyone got a set and if not who do I go to any help would be appreciated. Thanks Rob
×
×
  • Create New...