Jump to content

Rubbing strips


Recommended Posts

Guest Bodgit

Hi all. A little help please. Have removed the plasic arches and replaced the vr rubbing strips with ones off a cl but can't properly attach the strips. I went to vw but the only clips they had made them stick out too far. Please could anyone suggest a way of doing it so it looks good and not like blue peter did it. Cheers.

Link to post
Share on other sites

r u sure they are pushed on properly, i done the same on mine, and they were a bitch to put on. put a little washing up liquid on each of the rubber things which go ova the clips b4 u push them on. u may even have to give it a whack wit ur hand, i did!!

Link to post
Share on other sites

there are 2 different types of clip available from vw

some of them stick out more than the others due to the shape of the door ...

make sure you have the right ones in the right places 1st,

then, make sure the green grommets are fully onto the clip and the clips are properly on the moulding before pressing them into the door.....

hope this helps . . . . .

Link to post
Share on other sites
×
×
  • Create New...