Ciaran 4 Posted May 24, 2006 Report Share Posted May 24, 2006 fitted mine yesterday and what a pain in the arsethe pipe that u have to attach onto it had a pipe provided that was to small diameter wise and had to be halved in size.also even after cutting this down to size iv found it still is to long any ideas so that the pipe attached is not bent double??any help appreciated Link to post Share on other sites
Petesvw 0 Posted May 24, 2006 Report Share Posted May 24, 2006 Do you mean the pipe coming from the rocker cover?If so, i just used a new section of pipe, but replaced the valve! A hell of a lot easier! Link to post Share on other sites
cadguy77 0 Posted May 25, 2006 Report Share Posted May 25, 2006 i removed the dummy sensor in that line too, keeps the overall length right down Link to post Share on other sites
Ciaran 4 Posted May 25, 2006 Author Report Share Posted May 25, 2006 what did u use to join the pipes guessed that sensor was a dummy.may just find something to join the pipes together any idea?? Link to post Share on other sites
cadguy77 0 Posted May 25, 2006 Report Share Posted May 25, 2006 small length of motor grade hose with the right internal dia Link to post Share on other sites
Ciaran 4 Posted May 25, 2006 Author Report Share Posted May 25, 2006 just take out that the dummy sensor thing then connect it straight from the inlet to the diaphragm thing?? Link to post Share on other sites
cadguy77 0 Posted May 25, 2006 Report Share Posted May 25, 2006 yeah that's the kiddy Link to post Share on other sites
Recommended Posts