Zonda_ 0 Posted February 15, 2006 Report Share Posted February 15, 2006 I'm going to swap the leather trim from one of my VR6's to the other. How long am I looking at to do this? |I know with seats I've removed from other cars it was a case of undoing one bolt and the front seats would slide off their runners. Back seats dont seem to be much more complicated.I will be swaping door cards etc too.Any advice appreciated. Link to post Share on other sites
stockers 1 Posted February 15, 2006 Report Share Posted February 15, 2006 if your just goung to to do: seats ,door cards i would say a leisurely 2 hours. Link to post Share on other sites
six appeal 53 Posted February 15, 2006 Report Share Posted February 15, 2006 If you've got plenty of room and the right tools Id say a half day, 4 to 6 hours to completely swop the 2 over. You don't want to be rushing the door cards as they have a tendancy to rip!Simon. Link to post Share on other sites
Zonda_ 0 Posted February 15, 2006 Author Report Share Posted February 15, 2006 Also, the leather is heated so that will need to be wired in to the other car. Link to post Share on other sites
jezmoz 0 Posted February 17, 2006 Report Share Posted February 17, 2006 as stockers said two hours max for basic interior (no dash swap), wiring the seats will rpobably take longer to be honest Link to post Share on other sites
SHARKY 0 Posted February 17, 2006 Report Share Posted February 17, 2006 It took me about 5/6 hours including wiring loom Link to post Share on other sites
Recommended Posts