lee101 0 Posted April 6, 2004 Report Share Posted April 6, 2004 hi im new, i have a 93 vr6 with a slight mis fire but its only between 1000 and 1500 rpm and then clears and only when its under load, its fine when stood still. i have checked the leads etc but its still there,any help would be greatly appreciated Link to post Share on other sites
apd 0 Posted April 6, 2004 Report Share Posted April 6, 2004 lee101:see previous posts on coils. Link to post Share on other sites
28v6r 0 Posted April 7, 2004 Report Share Posted April 7, 2004 And coat the coil pack in silicone grease.... It acts as an insulator and stops arcing. Link to post Share on other sites
ingham 5 Posted September 22, 2005 Report Share Posted September 22, 2005 try new plugs Link to post Share on other sites
matrix 0 Posted September 22, 2005 Report Share Posted September 22, 2005 i thought my leads were ok i had the same prob as you so i bought new leads anyway and found a split in 1 of them have a good look at them. Link to post Share on other sites
shail 0 Posted September 22, 2005 Report Share Posted September 22, 2005 Used to have the same problem. New leads sorted it & sorting a crack in the coil pack. Link to post Share on other sites
Recommended Posts