kobi 0 Posted June 21, 2005 Report Share Posted June 21, 2005 Alright chaps.I've had a BMC induction kit fitted by stealth recently.I'm driving back and its making way too much noise.I get home, look under the bonnet and there's no cold air flow pipe (not sure what its called).As it happens Stealth didnt fit it %-6 They've posted it to me. I've tried fitting the bloody thing and now realise why they couldnt be bothered.... theres no way to get the pipe on and through the gap (the pipe seems too big).I know my descriptive writing is a bit poor... but anyone have any clues?!! Link to post Share on other sites
vr6freak 3 Posted June 21, 2005 Report Share Posted June 21, 2005 I think there is a fitting guide for premier members section. Link to post Share on other sites
VR6Pete 1,455 Posted June 21, 2005 Report Share Posted June 21, 2005 If you have air con, you have no chance. In all honestly you dont get any performance gains with the feed attached.If you dont have air con, it's pretty much a bumper off job to fit the piper properly... In all honestly I dont find the BMC CDA that loud, At the end of the day it's down to your preference. my intake pipe went in the bin. Link to post Share on other sites
bazz780 0 Posted June 22, 2005 Report Share Posted June 22, 2005 what i did was used the standard cold air feed and twisted and fiddled with it to mouth it into the bmc filter - worked fine for me Link to post Share on other sites
Col_M 0 Posted June 22, 2005 Report Share Posted June 22, 2005 what i did was used the standard cold air feed and twisted and fiddled with it to mouth it into the bmc filter - worked fine for meIdeal, i'll have a blast at that once mine comes cheers Link to post Share on other sites
craggsy 91 Posted June 22, 2005 Report Share Posted June 22, 2005 Coz of the condensor for air con i had to kinda bodge mine in so it attaches to front bumper Link to post Share on other sites
Recommended Posts