3.0 overbored vr6 block

[michael5556 247]

hello, unfortunately the time has come to sell my 3.0 forged block. The block is fully rebuilt and is turned over every week religiously by myself. here is the spec.

 

3.0 overbored vr6 block

shot peened rods

Forged Mahle mopisan 82.5mm pistons with brand new rings from stealth motorspoort

New - Calico black bearings top to bottom

Fully balanced

All pistons now weigh the same. They were 15+ grams out so have been sanded with 200 grit paper to get them all within .5 grams of each other.

New rod top heat treated bushes pressed in and reemed out using 3000 grit.

Block has been magnafluxed to check for cracks and wear.

All water and oil jackets/galleries shocked using a 2mm boroscope.

New roose Motorsport black silicone oil to cooler hoses

Polished integrated Engineering Billet crack pipe

Modified sump with manganese plated bottom. (hard enough to be driven on)

Genuine oil pump

Polished cam chain covers

Polished aux belt tensioner

new intermediate bearings

New core plugs

Chrome plated dipstick

Chrome plated water pump pulley.

Polished oil filter housing

24k gold plated bolts holding auxilarry bracket to engine

polished rear engine mounting bracket

 

I also have a mocal oil cooler set up that can come with the engine and end cap with longer bolt from UM for a price.

 

I also have a bare head that has been chemically dipped over night to remove all grim and grease. It has also had a very light skim nd new guides fitted to it.

 

I will include the custom made trolley for it and any/all spares i have for the engine such as crank seals etc.

 

The engine is located in stockport.

 

Asking price is £1100 with the head. This is priced for a quick sale. I am open to close offers though if it means it goes quicker. 

 

 

 

Edited November 27, 2015 by michael5556

[Dyson333 30]

Hi is this still for sale?

[michael5556 247]

sold a couple of weeks ago sorry