vdubhead 51 Posted April 13, 2015 Report Share Posted April 13, 2015 Hi guys im wondering if any one has any knowledge on these vr6 gti enginnered engines like what the internals consist off, if any headwork etc been done as thinking of replicating one. Was gonna buy one till noticed engine is screwed so steard away from it. Any info that can be shed on these engines will be appreciated. Happy show season of dubbing oliver cox 1 Link to post Share on other sites
trentster_08 0 Posted April 14, 2015 Report Share Posted April 14, 2015 (edited) Ok I misread you question Edited April 14, 2015 by trentster_08 Link to post Share on other sites
trentster_08 0 Posted April 14, 2015 Report Share Posted April 14, 2015 (edited) ^i would like to know also Edited April 14, 2015 by trentster_08 Link to post Share on other sites
vdubhead 51 Posted April 14, 2015 Author Report Share Posted April 14, 2015 ^i would like to know alsoYh be good to see some info on these Link to post Share on other sites
IbizaPartyBoy 34 Posted April 18, 2015 Report Share Posted April 18, 2015 270 cams is all I found out about them.. Their 8v mk2 gti's were rapid.. Had a 1.9 few years ago, left both mine and pals 16v in its wake.. Link to post Share on other sites
vdubhead 51 Posted April 18, 2015 Author Report Share Posted April 18, 2015 Must have some fancy map too for 270 cams as they are big profile as most use 268 cams Link to post Share on other sites
vdubhead 51 Posted April 19, 2015 Author Report Share Posted April 19, 2015 Its Quite a special car this, as it had been sent to GTI Engineering /BBR for a Super Plus Pac engine upgrade when it was around a year old, which consisted on gasflowed/ported cylinder head, highlift cams, flowed throttle body, chip, modified airbox and panel filter, it made for a rather swift VR6, and after owning several of these since, i have yet to come across another that has a top end like this one, still running standard valves and inlet manifold. My mate has a VR6 with a big valve head and Schrick manifold its better than this but not massively Link to post Share on other sites
vdubhead 51 Posted April 19, 2015 Author Report Share Posted April 19, 2015 Thats the info found on pistonheads and time to commence saving and start build ☺ Link to post Share on other sites
science 7 Posted April 19, 2015 Report Share Posted April 19, 2015 Their VR engines consist of;Plus Pac,Super Plus Pac,REC3000 (2.8 - 3l),REC3100 (2.9 - 3.1l),REC3100S (2.8 - 3.1l).See here;http://www.bbrgti.com/bbr-gti/gti_MK3Eng.php Link to post Share on other sites
vdubhead 51 Posted April 19, 2015 Author Report Share Posted April 19, 2015 Their VR engines consist of;Plus Pac,Super Plus Pac,REC3000 (2.8 - 3l),REC3100 (2.9 - 3.1l),REC3100S (2.8 - 3.1l).See here;http://www.bbrgti.com/bbr-gti/gti_MK3Eng.phpThanks alot dude been looking gor this type of info for while now Link to post Share on other sites
science 7 Posted April 19, 2015 Report Share Posted April 19, 2015 No worries, hope you find / build another one! Link to post Share on other sites
vdubhead 51 Posted April 19, 2015 Author Report Share Posted April 19, 2015 Yeah defo gonna build one as they fantastic engines Link to post Share on other sites
Recommended Posts