dom.joy 87 Posted March 24, 2015 Report Share Posted March 24, 2015 I am wanting to run a cold air feed from lower bumper grills but the carbon canister is in the way as I'm sure many of you have come across.what is preferred?removing completely and plugging one of the hoses?or relocating to passenger side? cheers Bealieboy 1 Link to post Share on other sites
Bealieboy 1,625 Posted March 24, 2015 Report Share Posted March 24, 2015 The usual crack is to remove the carbon canister or divert the induction route. Link to post Share on other sites
dom.joy 87 Posted March 24, 2015 Author Report Share Posted March 24, 2015 I've got it diverted as best I can at the moment but isn't perfect. Might remove it but leave it reversible just in case Bealieboy 1 Link to post Share on other sites
Bealieboy 1,625 Posted March 24, 2015 Report Share Posted March 24, 2015 It most likely is possible to relocate the carbon canister, I'm not familiar with that mod though Link to post Share on other sites
CALICO 130 Posted March 25, 2015 Report Share Posted March 25, 2015 Remove and plug Link to post Share on other sites
Vag-hag 147 Posted March 25, 2015 Report Share Posted March 25, 2015 Bin it... It's probably doing nothing now anyway. Leave the fuel line open and plug the inlet side. If you leave the solenoid plugged in then you won't get a fault code.That's what I did on my corrado. Bealieboy 1 Link to post Share on other sites
dom.joy 87 Posted March 25, 2015 Author Report Share Posted March 25, 2015 Thanks guys Link to post Share on other sites
Recommended Posts